Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate
--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
  #2   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 10,730
Default Connector ID please

Two come to mind. One is "lighter plug" which is the automobile version.
Other is "coaxial power plug". I think.... hang on.

Coaxial :
http://brain.pan.e-merchant.com/8/5/...l_00563558.jpg

Coaxial to 9 volt clip (looks useful)

http://www.active123.com/310645-Coax...-Prodview.html

Lighter plug to coaxial adaptor:

http://www.aliexpress.com/item/Car-P...316299466.html



..
Christopher A. Young
Learn about Jesus
www.lds.org
..

On 9/12/2013 10:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate

  #3   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 539
Default Connector ID please


Nate Nagel wrote:

what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate
--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel


Post a picture somewhere as there are dozens of different "battery"
connectors. Molex, AMP Mate and lock, Anderson Power Pole, various
"coaxial" styles, etc.
  #4   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

On 09/12/2013 11:12 AM, Pete C. wrote:

Nate Nagel wrote:

what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate
--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel


Post a picture somewhere as there are dozens of different "battery"
connectors. Molex, AMP Mate and lock, Anderson Power Pole, various
"coaxial" styles, etc.


Sorry, I had thought I'd copied and pasted a link to a specific product,
but it clearly didn't "take." (I don't know why, sometimes ctrl-c,
ctrl-v works, sometimes it doesn't.) I'm sure I've seen a larger
version of this same connector used for electric winches as well. Let's
try this again... THIS external battery pack connector.

http://www.amazon.com/Tripp-Lite-SU1...qid=1379002059

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
  #5   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 14,845
Default Connector ID please

On Thursday, September 12, 2013 12:08:21 PM UTC-4, Nate Nagel wrote:
....Snip...



Sorry, I had thought I'd copied and pasted a link to a specific product,
but it clearly didn't "take." (I don't know why, sometimes ctrl-c,
ctrl-v works, sometimes it doesn't.) I'm sure I've seen a larger
version of this same connector used for electric winches as well. Let's
try this again... THIS external battery pack connector.

http://www.amazon.com/Tripp-Lite-SU1...qid=1379002059

nate

I'm confused. That link is to a rack mount UPS. Why are you calling it a "connector"?


  #6   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

On 09/12/2013 12:34 PM, DerbyDad03 wrote:
On Thursday, September 12, 2013 12:08:21 PM UTC-4, Nate Nagel wrote:
...Snip...



Sorry, I had thought I'd copied and pasted a link to a specific product,
but it clearly didn't "take." (I don't know why, sometimes ctrl-c,
ctrl-v works, sometimes it doesn't.) I'm sure I've seen a larger
version of this same connector used for electric winches as well. Let's
try this again... THIS external battery pack connector.

http://www.amazon.com/Tripp-Lite-SU1...qid=1379002059

nate

I'm confused. That link is to a rack mount UPS. Why are you calling it a "connector"?


That's the connector that I'm trying to identify, the one used for the
external battery pack for that UPS. I was hoping to be able to purchase
the connector and then connect it to a lighter socket or terminal strip
so that I could use natively 12VDC devices in the house without using
wall warts.

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
  #7   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 551
Default Connector ID please

On 09/12/2013 09:37 AM, Nate Nagel wrote:
On 09/12/2013 12:34 PM, DerbyDad03 wrote:
On Thursday, September 12, 2013 12:08:21 PM UTC-4, Nate Nagel wrote:
...Snip...



Sorry, I had thought I'd copied and pasted a link to a specific product,
but it clearly didn't "take." (I don't know why, sometimes ctrl-c,
ctrl-v works, sometimes it doesn't.) I'm sure I've seen a larger
version of this same connector used for electric winches as well. Let's
try this again... THIS external battery pack connector.

http://www.amazon.com/Tripp-Lite-SU1...qid=1379002059


nate

I'm confused. That link is to a rack mount UPS. Why are you calling it
a "connector"?


That's the connector that I'm trying to identify, the one used for the
external battery pack for that UPS. I was hoping to be able to purchase
the connector and then connect it to a lighter socket or terminal strip
so that I could use natively 12VDC devices in the house without using
wall warts.


What connector? All I see is a UPS.

Jon

  #8   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 539
Default Connector ID please


Nate Nagel wrote:

On 09/12/2013 12:34 PM, DerbyDad03 wrote:
On Thursday, September 12, 2013 12:08:21 PM UTC-4, Nate Nagel wrote:
...Snip...



Sorry, I had thought I'd copied and pasted a link to a specific product,
but it clearly didn't "take." (I don't know why, sometimes ctrl-c,
ctrl-v works, sometimes it doesn't.) I'm sure I've seen a larger
version of this same connector used for electric winches as well. Let's
try this again... THIS external battery pack connector.

http://www.amazon.com/Tripp-Lite-SU1...qid=1379002059

nate

I'm confused. That link is to a rack mount UPS. Why are you calling it a "connector"?


That's the connector that I'm trying to identify, the one used for the
external battery pack for that UPS. I was hoping to be able to purchase
the connector and then connect it to a lighter socket or terminal strip
so that I could use natively 12VDC devices in the house without using
wall warts.


"Anderson Power Pole"
  #9   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 10,730
Default Connector ID please

Sounds like it would be easier to open the case, and wire directly.

..
Christopher A. Young
Learn about Jesus
www.lds.org
..

On 9/12/2013 12:37 PM, Nate Nagel wrote:

That's the connector that I'm trying to identify, the one used for the
external battery pack for that UPS. I was hoping to be able to purchase
the connector and then connect it to a lighter socket or terminal strip
so that I could use natively 12VDC devices in the house without using
wall warts.

nate

  #10   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4,463
Default Connector ID please

On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate


Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


  #11   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

On 09/12/2013 02:55 PM, The Daring Dufas wrote:
On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate


Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html

if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
  #12   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

On 09/12/2013 03:02 PM, Nate Nagel wrote:
On 09/12/2013 02:55 PM, The Daring Dufas wrote:
On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate


Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html


if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.

nate


Oh, and searching for "powerpole winch" reveals that I wasn't smoking
crack, they are apparently used for winch wiring as well. But for some
reason I couldn't find it without knowing the name...

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel
  #13   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4,463
Default Connector ID please

On 9/12/2013 2:02 PM, Nate Nagel wrote:
On 09/12/2013 02:55 PM, The Daring Dufas wrote:
On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the UPS
when in use anyway.

thanks

Nate


Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html


if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.

nate


I rebuild UPS units and take bad batteries to the recycler all the time.
I'll never understand why people throw the units out when
all they need are new batteries. I suppose it's good for me but the
dummies still toss perfectly good equipment. I just put two new AGM
batteries in a 750va UPS that would cost $400.00 new, $32.00 for new
batteries. O_o

TDD
  #14   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 1,143
Default Connector ID please

On 09/12/13 03:27 pm, The Daring Dufas wrote:

what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the
UPS
when in use anyway.


Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html



if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.


I rebuild UPS units and take bad batteries to the recycler all the time.
I'll never understand why people throw the units out when
all they need are new batteries. I suppose it's good for me but the
dummies still toss perfectly good equipment. I just put two new AGM
batteries in a 750va UPS that would cost $400.00 new, $32.00 for new
batteries. O_o


I used to replace APC UPSes because a new "genuine APC" battery pack
cost more than a new UPS on sale from Staples, Costco, etc. However,
having not thrown out the old UPSes, I have simply bought new batteries
for some of them and returned them to service. The last few batteries
came from Chrome Battery (with which I have no relationship other than
as a satisfied customer).

Perce
  #15   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 2,679
Default Connector ID please

On 09/12/2013 03:27 PM, The Daring Dufas wrote:
On 9/12/2013 2:02 PM, Nate Nagel wrote:
On 09/12/2013 02:55 PM, The Daring Dufas wrote:
On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know this
but my brain isn't helping, and I'm not coming up with the right search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the
UPS
when in use anyway.

thanks

Nate

Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD


I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html



if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.

nate


I rebuild UPS units and take bad batteries to the recycler all the time.
I'll never understand why people throw the units out when
all they need are new batteries. I suppose it's good for me but the
dummies still toss perfectly good equipment. I just put two new AGM
batteries in a 750va UPS that would cost $400.00 new, $32.00 for new
batteries. O_o

TDD


Well, the $100 ones it probably isn't worth it, because a newer one
will have better features (able to e.g. shut off your printer, scanner,
etc. for you when you power down your PC) but I agree in principle.
This unit I'm using would retail for over $400, I picked it up for $100
used figuring that it would need batteries, guess what, I got luck,
batteries are still good (for now, anyway.)

I wouldn't mind replacing some of my other ones with better quality
ones, but I can't justify the cost now, and they're only backing up
computer equipment anyway, which contrary to popular belief is not
really that picky about the power that you feed through it. The reason
for searching out a good, double-conversion UPS is it's also backing up
my rack of entertainment stuff (not that I want to keep it on during an
outage, but I prefer my stuff to shut down gracefully; also, the cable
box takes forever to come back up after an outage of only a few seconds)
and believe it or not but my LCD TV is highly not happy with anything
other than a true sine wave output as I discovered one day when the
power went out while I was watching TV.

nate

--
replace "roosters" with "cox" to reply.
http://members.cox.net/njnagel


  #16   Report Post  
Posted to alt.home.repair
external usenet poster
 
Posts: 4,463
Default Connector ID please

On 9/12/2013 3:24 PM, Nate Nagel wrote:
On 09/12/2013 03:27 PM, The Daring Dufas wrote:
On 9/12/2013 2:02 PM, Nate Nagel wrote:
On 09/12/2013 02:55 PM, The Daring Dufas wrote:
On 9/12/2013 9:12 AM, Nate Nagel wrote:
what is the external battery pack connector called? I should know
this
but my brain isn't helping, and I'm not coming up with the right
search
keywords either. I have a few battery chargers for rechargeable
batteries; rather than using a wall wart for each I was going to take
12VDC from my UPS since the chargers all need to be plugged into the
UPS
when in use anyway.

thanks

Nate

Perhaps this link will help you out? I have a number of large UPS units
and I needed the info anyway. ^_^

http://www.powerwerx.com/adapter-cables/

TDD

I think it's been confirmed that they're Anderson Powerpole, this would
have solved the problem nicely

http://www.powerwerx.com/adapter-cab...powerpole.html




if I had a smaller unit, but as another poster pointed out, the decently
sized ones are actually 24VDC not 12VDC. D'oh.

nate


I rebuild UPS units and take bad batteries to the recycler all the time.
I'll never understand why people throw the units out when
all they need are new batteries. I suppose it's good for me but the
dummies still toss perfectly good equipment. I just put two new AGM
batteries in a 750va UPS that would cost $400.00 new, $32.00 for new
batteries. O_o

TDD


Well, the $100 ones it probably isn't worth it, because a newer one
will have better features (able to e.g. shut off your printer, scanner,
etc. for you when you power down your PC) but I agree in principle. This
unit I'm using would retail for over $400, I picked it up for $100 used
figuring that it would need batteries, guess what, I got luck, batteries
are still good (for now, anyway.)

I wouldn't mind replacing some of my other ones with better quality
ones, but I can't justify the cost now, and they're only backing up
computer equipment anyway, which contrary to popular belief is not
really that picky about the power that you feed through it. The reason
for searching out a good, double-conversion UPS is it's also backing up
my rack of entertainment stuff (not that I want to keep it on during an
outage, but I prefer my stuff to shut down gracefully; also, the cable
box takes forever to come back up after an outage of only a few seconds)
and believe it or not but my LCD TV is highly not happy with anything
other than a true sine wave output as I discovered one day when the
power went out while I was watching TV.

nate


The only piece of equipment I've ever installed that required a true
sine wave output UPS was an Intertel GMX-48 phone system and that was
more than 20 years ago. I don't think it had a switching power supply
most of which don't care about the quality of power supplied to them. I
imagine electronic gear of the future will operate on the electrical
charge produced when you walk across a carpet. Anyway, I must pick up
another case of 12 volt AGM batteries with 1/4" Faston terminals at the
supply house so I can repair some of the 1kw and larger rack mount UPS
units I have holding down the carpet. We just picked up a 55" LCD TV
from an individual desperate for cash and I'll see if a UPS will work on
it. ^_^

TDD
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Name that connector Theo Markettos UK diy 7 May 22nd 15 02:44 PM
Pan connector Tom Pickles[_2_] UK diy 7 January 11th 11 10:51 AM
Connector for MC? Ted[_9_] Home Repair 4 June 11th 08 04:34 AM
BSP Connector Help [email protected] UK diy 3 June 16th 05 12:16 PM
WC pan connector help please Broadback UK diy 3 December 17th 04 07:50 PM


All times are GMT +1. The time now is 04:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"