Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
I bought an electric chain saw and following instructions I added bar and
chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? Make a poultice: Take your strongest oil remover* mix it with Talc (baby powder). Apply, cover with plastic, do it hundred times. Leave poultice for 24 hours and repeat. It draws the stain out. * Like the Techniseals product? http://www.techniseal.com/web/product.php?prodID=14 [The closest place to buy is a 3 hour round trip.] Try baking soda or powder to absorb it. When stain is still fresh apply anything absorbent like baking soda, flour, sawdust, salt. After the fact, you can try applying a paste made from baking soda, scrubbing it into the stain, letting it dry in place, then washing it off. Some people have success pouring cola and/or scrubbing with dishwashing detergent. There are probably commercial cleaners available in auto supply stores. A good scrubbing with a grease cutting cleaner like Simple Green or that orange stuff should take care of it. Try a bit of peroxide mixed w/ the baking soda - scrub it in & let it sit for a bit. May have to repeat. Wash with a strong solution of washing soda and hot water. If stain remains, make a paste of 1 pound strong powdered cleaner, 2 cups powdered chalk, and 1 gallon water and cover the stain. Or, cover with a paste made from fullers earth (an absorbent clay used for removing grease from fabrics) and hot water. Leave the paste on overnight. Rinse with clear water. Repeat if necessary. Don www.donwiss.com (e-mail link at home page bottom). P.S. Before jumping on me asking why I was cutting up the logs on bluestone, the answer is I have no choice. The front areaway (where the wood is) is all bluestone. And also all of the backyard, plus it would be a major effort getting the logs from the front to the back. |
#2
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On Oct 19, 6:09*pm, Don Wiss wrote:
I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? Make a poultice: Take your strongest oil remover* mix it with Talc (baby powder). Apply, cover with plastic, do it hundred times. Leave poultice for 24 hours and repeat. It draws the stain out. * Like the Techniseals product?http://www.techniseal.com/web/product.php?prodID=14 [The closest place to buy is a 3 hour round trip.] Try baking soda or powder to absorb it. When stain is still fresh apply anything absorbent like baking soda, flour, sawdust, salt. After the fact, you can try applying a paste made from baking soda, scrubbing it into the stain, letting it dry in place, then washing it off. Some people have success pouring cola and/or scrubbing with dishwashing detergent. There are probably commercial cleaners available in auto supply stores. A good scrubbing with a grease cutting cleaner like Simple Green or that orange stuff should take care of it. Try a bit of peroxide mixed w/ the baking soda - scrub it in & let it sit for a bit. May have to repeat. Wash with a strong solution of washing soda and hot water. If stain remains, make a paste of 1 pound strong powdered cleaner, 2 cups powdered chalk, and 1 gallon water and cover the stain. Or, cover with a paste made from fullers earth (an absorbent clay used for removing grease from fabrics) and hot water. Leave the paste on overnight. Rinse with clear water. Repeat if necessary. Don www.donwiss.com (e-mail link at home page bottom). P.S. Before jumping on me asking why I was cutting up the logs on bluestone, the answer is I have no choice. The front areaway (where the wood is) is all bluestone. And also all of the backyard, plus it would be a major effort getting the logs from the front to the back. Try the methods you have researched... One or more of them will work... Next time you need to cut logs, I recommend putting down plastic where you will be placing the oil soaked electric chain saw... ~~ Evan |
#3
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On 10/19/2010 3:09 PM Don Wiss spake thus:
I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? I know from experience what'll work because just today I had to wipe some spilled oil (Watco teak oil) from slate. Just used ordinary paint thinner, and it worked fine. Any equivalent solvent will work (naphtha, turpentine, etc.) Don't use acetone or lacquer thinner--overkill. -- The fashion in killing has an insouciant, flirty style this spring, with the flaunting of well-defined muscle, wrapped in flags. - Comment from an article on Antiwar.com (http://antiwar.com) |
#4
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On Tue, 19 Oct 2010, David Nebenzahl wrote:
On 10/19/2010 3:09 PM Don Wiss spake thus: I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? I know from experience what'll work because just today I had to wipe some spilled oil (Watco teak oil) from slate. Just used ordinary paint thinner, and it worked fine. Any equivalent solvent will work (naphtha, turpentine, etc.) Don't use acetone or lacquer thinner--overkill. I don't think slate is as porous as bluestone. This all soaked in right away. Don www.donwiss.com (e-mail link at home page bottom). |
#5
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On 10/19/2010 5:51 PM Don Wiss spake thus:
On Tue, 19 Oct 2010, David Nebenzahl wrote: On 10/19/2010 3:09 PM Don Wiss spake thus: I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? I know from experience what'll work because just today I had to wipe some spilled oil (Watco teak oil) from slate. Just used ordinary paint thinner, and it worked fine. Any equivalent solvent will work (naphtha, turpentine, etc.) Don't use acetone or lacquer thinner--overkill. I don't think slate is as porous as bluestone. This all soaked in right away. I'd still try solvent. You may still have to use one of those other methods of attack you found, but it will definitely not hurt to try to sop up some of the oil with paint thinner or equivalent. -- The fashion in killing has an insouciant, flirty style this spring, with the flaunting of well-defined muscle, wrapped in flags. - Comment from an article on Antiwar.com (http://antiwar.com) |
#6
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On 10/19/2010 6:09 PM, Don Wiss wrote:
I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? Make a poultice: Take your strongest oil remover* mix it with Talc (baby powder). Apply, cover with plastic, do it hundred times. Leave poultice for 24 hours and repeat. It draws the stain out. * Like the Techniseals product? http://www.techniseal.com/web/product.php?prodID=14 [The closest place to buy is a 3 hour round trip.] Try baking soda or powder to absorb it. When stain is still fresh apply anything absorbent like baking soda, flour, sawdust, salt. After the fact, you can try applying a paste made from baking soda, scrubbing it into the stain, letting it dry in place, then washing it off. Some people have success pouring cola and/or scrubbing with dishwashing detergent. There are probably commercial cleaners available in auto supply stores. A good scrubbing with a grease cutting cleaner like Simple Green or that orange stuff should take care of it. Try a bit of peroxide mixed w/ the baking soda - scrub it in& let it sit for a bit. May have to repeat. Wash with a strong solution of washing soda and hot water. If stain remains, make a paste of 1 pound strong powdered cleaner, 2 cups powdered chalk, and 1 gallon water and cover the stain. Or, cover with a paste made from fullers earth (an absorbent clay used for removing grease from fabrics) and hot water. Leave the paste on overnight. Rinse with clear water. Repeat if necessary. Donwww.donwiss.com (e-mail link at home page bottom). P.S. Before jumping on me asking why I was cutting up the logs on bluestone, the answer is I have no choice. The front areaway (where the wood is) is all bluestone. And also all of the backyard, plus it would be a major effort getting the logs from the front to the back. I used cat litter to soak up motor oil from concrete...worked very well. Spread it on, mash it in with your foot, and let it soak for a couple of days. Sweep it up, hose off the dust that remains. Repeat if still stained. |
#7
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On Oct 19, 5:09*pm, Don Wiss wrote:
I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? Make a poultice: Take your strongest oil remover* mix it with Talc (baby powder). Apply, cover with plastic, do it hundred times. Leave poultice for 24 hours and repeat. It draws the stain out. * Like the Techniseals product?http://www.techniseal.com/web/product.php?prodID=14 [The closest place to buy is a 3 hour round trip.] Try baking soda or powder to absorb it. When stain is still fresh apply anything absorbent like baking soda, flour, sawdust, salt. After the fact, you can try applying a paste made from baking soda, scrubbing it into the stain, letting it dry in place, then washing it off. Some people have success pouring cola and/or scrubbing with dishwashing detergent. There are probably commercial cleaners available in auto supply stores. A good scrubbing with a grease cutting cleaner like Simple Green or that orange stuff should take care of it. Try a bit of peroxide mixed w/ the baking soda - scrub it in & let it sit for a bit. May have to repeat. Wash with a strong solution of washing soda and hot water. If stain remains, make a paste of 1 pound strong powdered cleaner, 2 cups powdered chalk, and 1 gallon water and cover the stain. Or, cover with a paste made from fullers earth (an absorbent clay used for removing grease from fabrics) and hot water. Leave the paste on overnight. Rinse with clear water. Repeat if necessary. Don www.donwiss.com (e-mail link at home page bottom). P.S. Before jumping on me asking why I was cutting up the logs on bluestone, the answer is I have no choice. The front areaway (where the wood is) is all bluestone. And also all of the backyard, plus it would be a major effort getting the logs from the front to the back. It might never come out except with time, you could treat the whole floor with a treatment for bluestone, then it will all match |
#8
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
In article , Don Wiss wrote:
I bought an electric chain saw and following instructions I added bar and chain oil. Without any personal experience in this exact situation, I wonder whether a small amount of diatomaceous earth might be worth applying to the stain areas. It's pretty spectacular stuff - kind of like kitty litter on steroids. Art |
#9
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On 10/21/2010 10:11 AM Arthur Shapiro spake thus:
In article , Don Wiss wrote: I bought an electric chain saw and following instructions I added bar and chain oil. Without any personal experience in this exact situation, I wonder whether a small amount of diatomaceous earth might be worth applying to the stain areas. It's pretty spectacular stuff - kind of like kitty litter on steroids. I wonder; I know it's great as an insecticide for certain species, but that's because it contains microscopically-sharp surfaces that cut the bug's exterior. Not sure how absorbent the stuff is. Cat litter might actually be better; I've used that on oil spills (on concrete) and it works pretty well. -- The fashion in killing has an insouciant, flirty style this spring, with the flaunting of well-defined muscle, wrapped in flags. - Comment from an article on Antiwar.com (http://antiwar.com) |
#11
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
In article , Don Wiss wrote:
. I decided to go for the Techniseal Professional Grade Oil & Grease Remover that I mentioned in my original article. Don, I hope you'll report back on the success/lack of success of this product. The general problem is something a lot of us face from time to time. Art |
#12
Posted to alt.home.repair
|
|||
|
|||
Removing oil stains from bluestone?
On Tuesday, October 19, 2010 at 6:09:53 PM UTC-4, Don Wiss wrote:
I bought an electric chain saw and following instructions I added bar and chain oil. Between cuts I set it down on the sawdust on the bluestone. Then when sweeping up I found an oil spot at each place I set it down. I certainly won't do this again, but the immediate problem is how to clean off the stains. I did some Googling. I got a variety of suggestions. Does anyone have some firsthand experience as to which of these actually work? Make a poultice: Take your strongest oil remover* mix it with Talc (baby powder). Apply, cover with plastic, do it hundred times. Leave poultice for 24 hours and repeat. It draws the stain out. * Like the Techniseals product? http://www.techniseal.com/web/product.php?prodID=14 [The closest place to buy is a 3 hour round trip.] Try baking soda or powder to absorb it. When stain is still fresh apply anything absorbent like baking soda, flour, sawdust, salt. After the fact, you can try applying a paste made from baking soda, scrubbing it into the stain, letting it dry in place, then washing it off. Some people have success pouring cola and/or scrubbing with dishwashing detergent. There are probably commercial cleaners available in auto supply stores. A good scrubbing with a grease cutting cleaner like Simple Green or that orange stuff should take care of it. Try a bit of peroxide mixed w/ the baking soda - scrub it in & let it sit for a bit. May have to repeat. Wash with a strong solution of washing soda and hot water. If stain remains, make a paste of 1 pound strong powdered cleaner, 2 cups powdered chalk, and 1 gallon water and cover the stain. Or, cover with a paste made from fullers earth (an absorbent clay used for removing grease from fabrics) and hot water. Leave the paste on overnight. Rinse with clear water. Repeat if necessary. Don www.donwiss.com (e-mail link at home page bottom). P.S. Before jumping on me asking why I was cutting up the logs on bluestone, the answer is I have no choice. The front areaway (where the wood is) is all bluestone. And also all of the backyard, plus it would be a major effort getting the logs from the front to the back. Just a note: I tried everything to get out a nasty oil stain on my bluestone and the only thing that worked is what is recommended he I made a poultice out of ammonia and baking soda, put a thick coating on the bluestone, covered with plastic, and to encourage the grease leaching into the baking soda I put heavy bricks on top of the plastic. Two 24 hour sessions and it was clean. A miracle! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Removing pomegranate stains | Home Repair | |||
Removing white stains from oak furniture | Woodworking | |||
Removing stains from old plastic countertop | Home Ownership | |||
Removing Grout stains from a carpet | UK diy | |||
removing stains from new sink | Home Repair |