Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Briggs Stratton 4HP high idle speed
I found the message I pasted below on this group a few days ago. I had
this exact same problem with the same motor (10A902) 4HP. after reading all the replies I went and replaced the diaphragm. The mower now has a steady idle but it is much much higher than it was before. The mower also seems to run twice as loud as it used to. What do I do to fix this problem. Tim CanadianCowboy My briggs and Strattan mover was working fine up until I ran it dry using every drop of gas. The next time I used the mover it runs rough with RPM's going up and down but never stalling. Is there a block in the carberator from the garbage at the bottom of the tank ? Do I have to take it apart and clean ? Any help would be appreciated !! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Briggs&Stratton 16 HP | Home Repair | |||
Briggs and Stratton 14.6 hp Intek won't start after sitting idle for 8 months | Home Repair | |||
Briggs/Stratton 3.5 hp | Home Repair | |||
Briggs & Stratton 14.5hp -- Odd Noises | Home Repair |