Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Ceramic Tile/ Grout question
All,
I have a large shower with 12+" ceramic tile on the floor and walls. The tile was set over schluter[sp?] waterproofing and bright orange dimply stuff. Quite state of th art 2 years ago, available at HD now. The tile is designed to slope to the drain and it does, but the tile guy didn't set it quite the way I wanted, and it as such the first tile around the edge is steeper thant the 6 or 9 in the middle. This causes a little water to remain in the grout lines till it evaporates. Hasn't been a problem, but I have noticed that in these areas [and not elsewhere] there are some 1/8-3/16 inch diameter voids in the grout. the grout also has an overall spally feel, like a little bit or sand comes up when you rub it with your finger, where it doesn't elsewhere. I have some of the grout in the garage[packrat] and can effect somekind of repair, but am wondering if there is a more permanent solution. The tile guy said the grout 'didn't need' to be sealed. The grout bag said you could so I did. Is it possible I didn't seal this area well? My plan is to dig out the small holes and fill with new grout. I jsut would like to do this once. Comments? G |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Uneven Tile | Home Repair | |||
Ceramic tile question | Home Repair | |||
Cleaning grout from tile surfaces | UK diy | |||
Best grout / sealant for shower ceramic tile ? | Home Repair | |||
Ceramic Tile in Shower Question | Home Repair |