How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.

www.corian.com




"kheffner" wrote in message
news:99db5244c5bf149f9a3a9c28b5e55c72@homerepairli ve.com...
How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.

Did you even look at your lame link to find out it has no information about
repair. Closest it comes to answering the OP question is to say not to put
hot pots on the surface. I think he already knows that.

The general wisdom on countertops is that once you buy all the required
abrasives and power buffer needed to remove the defect and then polish the
surface, you will have spent as much as a pro and have lots of leftovers.
Then there is the issue of skill, do you think you can make it look good the
first and only time you will do it. Corian also has the option of color
matched fillers if required, you'll never get that in the retail world.

If it is a real shallow burn, you might try some rubbing compound but even
this might dull the finish.



"Art" wrote in message
nk.net...
www.corian.com




"kheffner" wrote in message
news:99db5244c5bf149f9a3a9c28b5e55c72@homerepairli ve.com...
How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.

I guess you didn't look deep enuf:

http://www2.dupont.com/Surfaces/en_U...rian_care.html


Beyond that he will indeed have to call a pro.


"PipeDown" wrote in message
nk.net...
Did you even look at your lame link to find out it has no information
about repair. Closest it comes to answering the OP question is to say not
to put hot pots on the surface. I think he already knows that.

The general wisdom on countertops is that once you buy all the required
abrasives and power buffer needed to remove the defect and then polish the
surface, you will have spent as much as a pro and have lots of leftovers.
Then there is the issue of skill, do you think you can make it look good
the first and only time you will do it. Corian also has the option of
color matched fillers if required, you'll never get that in the retail
world.

If it is a real shallow burn, you might try some rubbing compound but even
this might dull the finish.



"Art" wrote in message
nk.net...
www.corian.com




"kheffner" wrote in message
news:99db5244c5bf149f9a3a9c28b5e55c72@homerepairli ve.com...
How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.

I found that, it still has nothing about repair. It is strictly care and
maintenence. This is the page that says not to put hot pots on the counter I
referred to.



"Art" wrote in message
nk.net...
I guess you didn't look deep enuf:

http://www2.dupont.com/Surfaces/en_U...rian_care.html


Beyond that he will indeed have to call a pro.


"PipeDown" wrote in message
nk.net...
Did you even look at your lame link to find out it has no information
about repair. Closest it comes to answering the OP question is to say
not to put hot pots on the surface. I think he already knows that.

The general wisdom on countertops is that once you buy all the required
abrasives and power buffer needed to remove the defect and then polish
the surface, you will have spent as much as a pro and have lots of
leftovers. Then there is the issue of skill, do you think you can make it
look good the first and only time you will do it. Corian also has the
option of color matched fillers if required, you'll never get that in the
retail world.

If it is a real shallow burn, you might try some rubbing compound but
even this might dull the finish.



"Art" wrote in message
nk.net...
www.corian.com




"kheffner" wrote in message
news:99db5244c5bf149f9a3a9c28b5e55c72@homerepairli ve.com...
How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.

"PipeDown" writes:

I found that, it still has nothing about repair. It is strictly care and
maintenence. This is the page that says not to put hot pots on the counter I
referred to.

Right near the end it discussed sanding pads.

In my opinion, you're wasting your time.
Contact Corian. They'll fix the counter.

I don't know how old yours is, but mine exploded (cracked) a couple of years
after I got it. (Microwave heated the counter.) Corian fixed it no
questions asked. Total cost ZERO.

You gave up too early. Sanding instructions are on that page.


"PipeDown" wrote in message
nk.net...
I found that, it still has nothing about repair. It is strictly care and
maintenence. This is the page that says not to put hot pots on the counter
I referred to.



"Art" wrote in message
nk.net...
I guess you didn't look deep enuf:

http://www2.dupont.com/Surfaces/en_U...rian_care.html


Beyond that he will indeed have to call a pro.


"PipeDown" wrote in message
nk.net...
Did you even look at your lame link to find out it has no information
about repair. Closest it comes to answering the OP question is to say
not to put hot pots on the surface. I think he already knows that.

The general wisdom on countertops is that once you buy all the required
abrasives and power buffer needed to remove the defect and then polish
the surface, you will have spent as much as a pro and have lots of
leftovers. Then there is the issue of skill, do you think you can make
it look good the first and only time you will do it. Corian also has
the option of color matched fillers if required, you'll never get that
in the retail world.

If it is a real shallow burn, you might try some rubbing compound but
even this might dull the finish.



"Art" wrote in message
nk.net...
www.corian.com




"kheffner" wrote in message
news:99db5244c5bf149f9a3a9c28b5e55c72@homerepairli ve.com...
How do I buff out or repair a corian sink edge that has been burned
slightly by a hot pan rested on it.