Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Oil Burner Questions
I have a Beckett head on a Bock Hot water heater. The heater was
shutting off and cavitating (pulsating). I changed the pump and nozzle and the pulsating went away. However, the burner still shuts off and trips the breaker on the controls. I've replaced the light sensor, transformer, controls and checked the gap on the electrodes. Everything looked fine. I'm wondering if the aquastat could be causing the burner not to light at times. When I press the breaker button the burner heats the ho****er to temp. Then for some reason, over night it pops the breaker on the control. ALso, the boiler is on the same line and it rund and shuts off fine. Any suggestions? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
BASIC oil burner questions | Home Repair | |||
FAQ: Answering questions emailed direct to 'editor' | UK diy | |||
Chimney cap, liner, oil burner, etc.... | Home Repair | |||
Wood Burner with back boiler - heating installation questions | UK diy | |||
Riello Oil Burner Questions | Home Repair |