Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12,924
Default Antenna rotator question

Jeff Liebermann wrote:
I don't think there's a single device available that does EPG
(electronic program guide) without bugs, added monthly costs, or
both. However, don't blame the guide vendor. Stations often change
their programming at the last moment for odd reasons (sponsor
pressure, current events, ongoing disaster coverage, etc).



The original EPG was a service provided by United Video
Cablevision's microwave division. Their computers were in Tulsa OK, and
they were linked to their WGN uplink in Chicago by a pair of leased
phone lines. One pair fed the data North to Chicago, while the second
echoed it back to their PDP -11 computers in Tulsa OK. It was
transmitted on a subcarrier along with WGN to CATV headends across the
country. The demod and processor was a 6502 based rack mounted computer
that put out NTSC color video. I got into a very heated argument with
the head of our Microwave division, as I told him how to uplink the
signal from the computer site, but leave it on the WGN transponder. He
told me it was impossible, so I told him that if he couldn't do it, he
should quit his job. Two months later, they announced the change, and
that HIS idea was saving the company over $15K per month for the leased
lines.


--
Never **** off an Engineer!

They don't get mad.

They don't get even.

They go for over unity! ;-)


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
One more antenna question: Antenna pitch? mm Electronics Repair 25 December 5th 09 11:23 AM
Source for 4-conductor antenna rotator cable? aemeijers Home Repair 11 July 7th 09 02:10 PM
Outside antenna rotator question... dpb Home Repair 58 January 10th 07 05:42 AM
old TV antenna rotator - replace missing controller? Bill Christens-Barry Home Ownership 2 December 11th 06 04:03 PM
55 Gallon Drum Rotator Made of Wood [email protected] Woodworking 5 August 31st 06 04:26 AM


All times are GMT +1. The time now is 08:26 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"