 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Whose logo is this ?
On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but
with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
Whose logo is this ?
"Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. ..... Phil |
|
#3
Posted to sci.electronics.repair
|
|||
|
|||
|
Whose logo is this ?
Arfa Daily wrote in message
... On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa anyone had any luck using likes of http://www.google.com/insidesearch/searchbyimage.html preceeded by phographing and uploading somewhere |
|
#4
Posted to sci.electronics.repair
|
|||
|
|||
|
Whose logo is this ?
"Phil Allison" wrote in message ... "Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. .... Phil OK. Thanks Phil. That goes along with some that I found on Digikey, that seemed to have a similar looking pinout, and also claimed to be of Panasonic manufacture - although of course, their picture helpfully said "for illustrative purposes only" ... They are in a Peavey Escort, but of course, Peavey UK are out of stock until the end of October at soonest, and the equipment is needed by next week ... Arfa |
|
#5
Posted to sci.electronics.repair
|
|||
|
|||
|
Whose logo is this ?
On 01/09/2011 14:42, N_Cook wrote:
Arfa wrote in message ... On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa anyone had any luck using likes of http://www.google.com/insidesearch/searchbyimage.html preceeded by phographing and uploading somewhere t's very poor in my experience, however 'TinEye' works far better (IMHO) http://www.tineye.com/ Ron |
|
#6
Posted to sci.electronics.repair
|
|||
|
|||
|
Whose logo is this ?
On Thu, 01 Sep 2011 23:36:49 +1000, Phil Allison wrote:
"Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. .... Phil Japan, M, Matsu****a. Gotta agree having done their warranty for 10 years. -- Live Fast Die Young, Leave A Pretty Corpse |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What is this logo ? | Electronic Schematics | |||
| rec.woodworking logo | Woodworking | |||
| Help ID a logo | Woodworking | |||
| Logo Design for only $19.95!!! | UK diy | |||
Linear Mode
