Whose logo is this ?
On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but
with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa |
Whose logo is this ?
"Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. ..... Phil |
Whose logo is this ?
Arfa Daily wrote in message
... On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa anyone had any luck using likes of http://www.google.com/insidesearch/searchbyimage.html preceeded by phographing and uploading somewhere |
Whose logo is this ?
"Phil Allison" wrote in message ... "Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. .... Phil OK. Thanks Phil. That goes along with some that I found on Digikey, that seemed to have a similar looking pinout, and also claimed to be of Panasonic manufacture - although of course, their picture helpfully said "for illustrative purposes only" ... They are in a Peavey Escort, but of course, Peavey UK are out of stock until the end of October at soonest, and the equipment is needed by next week ... Arfa |
Whose logo is this ?
On 01/09/2011 14:42, N_Cook wrote:
Arfa wrote in message ... On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... Arfa anyone had any luck using likes of http://www.google.com/insidesearch/searchbyimage.html preceeded by phographing and uploading somewhere t's very poor in my experience, however 'TinEye' works far better (IMHO) http://www.tineye.com/ Ron |
Whose logo is this ?
On Thu, 01 Sep 2011 23:36:49 +1000, Phil Allison wrote:
"Arfa Daily" On a 75mm slider pot from a powered mixer. It's basically a letter "M" , but with the bottoms of the 'legs' curled under towards the middle 'point'. "M" is enclosed in a square with rounded corners. Also says "Japan" on the body, but no other clues ... ** It's one of the logos used by Matsu****a. Aka , Panasonic. .... Phil Japan, M, Matsu****a. Gotta agree having done their warranty for 10 years. -- Live Fast Die Young, Leave A Pretty Corpse |
All times are GMT +1. The time now is 01:25 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter