Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,236
Default Anyone heard of Fox International for schematics

Toshiba HQ referred me to Fox International, 1-800-321-6993, for a
schematic of the Toshiba model 20A42, chassis 3L714. Before I get
involved with them, has anyone ever heard of them? Anyone have a pdf
file of the schematic?

TIA

H. R.(Bob) Hofmann
  #4   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 35
Default Anyone heard of Fox International for schematics

FOX has been around for a fair amount of time, are a reputable supplier of
SONY as well a many other manufacturer's products.
Never had any type of problem with them even regarding research for specific
items or stocking levels.

"Mark D. Zacharias" wrote in message
...

"William Sommerwerck" wrote in message
. ..
"hr(bob) " wrote in message
...

Toshiba HQ referred me to Fox International, 1-800-321-6993,
for a schematic of the Toshiba model 20A42, chassis 3L714.
Before I get involved with them, has anyone ever heard of them?


Fox International is (or was) one of the leading parts distributors. I've
bought GE parts from them, and have had no complaints.



Never liked them, but they're reputable enough.

Mark Z.

  #6   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,236
Default Anyone heard of Fox International for schematics

On Feb 6, 10:01*am, "nipperchipper" wrote:
hi bob
go here they have it foe free

http://www.eserviceinfo.com/index.php?what=search

"hr(bob) " wrote in message

...



Toshiba HQ referred me to Fox International, 1-800-321-6993, for a
schematic of the Toshiba model 20A42, chassis 3L714. *Before I get
involved with them, has anyone ever heard of them? *Anyone have a pdf
file of the schematic?


TIA


H. R.(Bob) Hofmann- Hide quoted text -


- Show quoted text -


Tried that, they didn't have that particular model. Thanx for the
tip.

Bob H
  #7   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,236
Default Anyone heard of Fox International for schematics

On Feb 6, 9:23*pm, "hr(bob) "
wrote:
On Feb 6, 10:01*am, "nipperchipper" wrote:





hi bob
go here they have it foe free


http://www.eserviceinfo.com/index.php?what=search


"hr(bob) " wrote in message


...


Toshiba HQ referred me to Fox International, 1-800-321-6993, for a
schematic of the Toshiba model 20A42, chassis 3L714. *Before I get
involved with them, has anyone ever heard of them? *Anyone have a pdf
file of the schematic?


TIA


H. R.(Bob) Hofmann- Hide quoted text -


- Show quoted text -


Tried that, they didn't have that particular model. *Thanx for the
tip.

Bob H- Hide quoted text -

- Show quoted text -


I googled on Fox International, but didn't come up with any company
that had a telephone number of 1-800-321-6993. Can someone tell me
where they are located or give me a web site address?

TIA

Bob Hofmann
  #8   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 140
Default Anyone heard of Fox International for schematics

Fox used to be on Aurora Road in an eastern suburb of Cleveland, Ohio.
Murray Fox started the thing, thus the name. The were just Fox for a
long time before becoming Fox International.

Before then I used to go there about twice a week. I took lunch with
Smitty and there were always parts needed. It was nice to be able to
just pick them up, but honestly, when you are talking like seven to
ten bucks shipping, I would rather not drive out there.

I do not know where they are now, and I thought they were out of
business. If they are still around thanks for the heads up.

JURB
  #10   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,236
Default Anyone heard of Fox International for schematics

On Feb 7, 4:22*am, "Mark D. Zacharias"
wrote:
"hr(bob) " wrote in message

...
On Feb 6, 9:23 pm, "hr(bob) "
wrote:

On Feb 6, 10:01 am, "nipperchipper" wrote:


- Show quoted text -
I googled on Fox International, but didn't come up with any company
that had a telephone number of 1-800-321-6993. *Can someone tell me
where they are located or give me a web site address?
TIA
Bob Hofmann


They are in Ohio, with another location in Texas. I call that number often
enough to know it's a good number.

Mark Z.


Mark - Thanx, I tend to be cautious. Bob Hofmann


  #11   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 47
Default Anyone heard of Fox International for schematics

On Feb 6, 10:35 pm, "hr(bob) "
wrote:
I googled on Fox International, but didn't come up with any company
that had a telephone number of 1-800-321-6993. Can someone tell me
where they are located or give me a web site address?


'fox international parts' yielded the following:
http://www.fox-international.com/
The estore contact page (http://estore.fox-international.com/
contact.asp)
has the above toll-free number.

TM
  #12   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 20
Default Anyone heard of Fox International for schematics

I have the schematic send me a valid email and I will forward to you


wrote in message
...
On Feb 6, 10:35 pm, "hr(bob) "
wrote:
I googled on Fox International, but didn't come up with any company
that had a telephone number of 1-800-321-6993. Can someone tell me
where they are located or give me a web site address?


'fox international parts' yielded the following:
http://www.fox-international.com/
The estore contact page (http://estore.fox-international.com/
contact.asp)
has the above toll-free number.

TM



  #13   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,236
Default Anyone heard of Fox International for schematics

On Feb 7, 12:32*pm, "nipperchipper" wrote:
I have the schematic send me a valid email and I will forward to you

wrote in message

...



Thanx, please send to:

Bob Hofmann
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Now I heard it all........ [email protected] Home Repair 9 May 14th 06 05:15 AM
Has anyone heard from Mac John B Woodworking 0 September 4th 05 01:56 PM
How Dare Could America Industrial Property Office Be In Conspiracy With Jungang International Patent Office To Make An Extravagant International Crime ? [email protected] Woodturning 2 June 5th 05 07:03 AM
has anyone heard? rosie read n' post Home Repair 26 April 15th 05 04:48 PM
2300+Monitor Schematics for Tech Engineers (August 2003) list Original UK schematics Monitor Schematics on CD Electronics Repair 1 August 10th 03 12:58 PM


All times are GMT +1. The time now is 03:24 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"