Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Toshiba 50V71 Chasis TAC 9958 Convergence Issues
Need help troubleshooting convergence issues on this set. Have
replaced both STK 392-110. Replacing the stk's seem to have not had any effect. I've checked all of the resistors near them and haven't found any open. I don't see any pico fuses to check. Is there any way I can rule out the digital convergence board? I could probably post a pic if this would help. Any ideas would be appreciated. Thanks in advance. Regards, Chance |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Toshiba 50V71 Chasis TAC 9958 Convergence Issues
On Oct 9, 7:10 pm, Chance wrote:
Need help troubleshooting convergence issues on this set. Have replaced both STK 392-110. Replacing the stk's seem to have not had any effect. I've checked all of the resistors near them and haven't found any open. I don't see any pico fuses to check. Is there any way I can rule out the digital convergence board? I could probably post a pic if this would help. Any ideas would be appreciated. Thanks in advance. Regards, Chance do you say 'issues' when you mean 'problems '? ;-) have you the schematic=? if not , try eserviceinfo.com -B |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Toshiba 50V71 Chasis TAC 9958 Convergence Issues
Check the +/- voltages to the STK Devices, either one missing indicates
either an open fuse device and/or power supply problem. A bit more deligence checking those particular circuits may resolve your problems. "b" wrote in message oups.com... On Oct 9, 7:10 pm, Chance wrote: Need help troubleshooting convergence issues on this set. Have replaced both STK 392-110. Replacing the stk's seem to have not had any effect. I've checked all of the resistors near them and haven't found any open. I don't see any pico fuses to check. Is there any way I can rule out the digital convergence board? I could probably post a pic if this would help. Any ideas would be appreciated. Thanks in advance. Regards, Chance do you say 'issues' when you mean 'problems '? ;-) have you the schematic=? if not , try eserviceinfo.com -B |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toshiba 50HX70 convergence question | Electronics Repair | |||
Toshiba chasis: tac9307 model: tv32c50 | Electronics Repair | |||
Toshiba convergence (and an idea) | Electronics Repair | |||
Toshiba Projection TV Convergence Problem | Electronics Repair | |||
Toshiba convergence problem | Electronics Repair |