Home |
Search |
Today's Posts |
![]() |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#10
![]()
Posted to sci.electronics.design,sci.electronics.repair,sci.physics,rec.audio.pro
|
|||
|
|||
![]()
In sci.physics Arny Krueger wrote:
wrote in message ... In sci.physics Arny Krueger wrote: "Ken Weitzel" wrote in message news:IsPxi.68411$_d2.64084@pd7urf3no... I do not know if the tracking radar and cop's radar gun were on the same band, however I do know that 1MW of microwaves was sufficiently nondiscriminatory at the receiving end to burn out its front end. I bet it was sufficiently nondiscriminatory at the receiving end to burn out the cop's front end, too. When people talk about megawatt radars, they are talking pulse peak powers. Radar pulses are very narrow - less than a microsecond. However, its peak voltage that usually frys semiconductors. If these megawatt-rated radars were not sending out short pulses, but continuous power, they'd have to build a commerical electrical generating plant next to them to run them in the field. Nike HIPAR, 10.4 MW, pulse width 6 microseconds. 10.4 * 10**6 * 6 * 10**-6 = 62.4 watts average power. Hawk 2nd generation tracking HPIR CW RADAR AN/MPQ 39 power seems to have not yet been revealed publicly. It has been publicly stated that the AN/MPQ 39 power output level exceeded that of the earlier AN/MPQ 33, which was 125 watts. This is a vast understatement! You forgot to allow for the PRT. The HIPAR average power was 26 kW. The LOPAR was 1 MW peak, 1.3 microseconds pulse width, 650 W average. The Hawk was OK when it worked instead of digging trenches while chasing jack rabbits around McGreggor Range. I heard the latest generation of Hawk doesn't do that. -- Jim Pennino Remove .spam.sux to reply. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Is it possible to convert an USB wire device to a bluetooth device? | Electronics Repair | |||
Device name? | Metalworking | |||
Anybody actually seen this new safety device? | Woodworking | |||
Factory built home vs. traditional site built home | Home Ownership | |||
Shop Built Wide belt sander vs Shop Built Drum sander....Whats easyer to make. Im no engineer. | Woodworking |