Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
mitsubishi 52525 and over the air signal
I am getting a message and a blue screen telling me that the channel
is not available however, when I unplug the tv and replug it in the channels are all there including the HD local channels out of NY and Philly. I know that it is bad for the bulb life doing this. I just replaced the bulb after approx 1000 hours. Any suggestions would be appreciated. Jack |
#2
Posted to sci.electronics.repair
|
|||
|
|||
mitsubishi 52525 and over the air signal
Get a better antenna and check to see if there are any firmware updates from
Mitsubishi that might affect the problem. Could be a bad DM module or signal board. Has the unit ever had trouble getting past the boot cycle? Leonard wrote in message oups.com... I am getting a message and a blue screen telling me that the channel is not available however, when I unplug the tv and replug it in the channels are all there including the HD local channels out of NY and Philly. I know that it is bad for the bulb life doing this. I just replaced the bulb after approx 1000 hours. Any suggestions would be appreciated. Jack |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
single ended signal to differential signal? | Electronics Repair | |||
mitsubishi wd-52525 display problem | Electronics Repair | |||
mitsubishi wd-52525 tv problem | Electronics Repair | |||
Help! : CXA2120Q or Scrap Mitsubishi VZ5 to VZ8 signal boards! | Electronics Repair | |||
signal generator to frequency counter signal tap | Electronics |