DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   mitsubishi 52525 and over the air signal (https://www.diybanter.com/electronics-repair/204685-mitsubishi-52525-over-air-signal.html)

[email protected] June 24th 07 12:36 PM

mitsubishi 52525 and over the air signal
 
I am getting a message and a blue screen telling me that the channel
is not available however, when I unplug the tv and replug it in the
channels are all there including the HD local channels out of NY and
Philly. I know that it is bad for the bulb life doing this. I just
replaced the bulb after approx 1000 hours. Any suggestions would be
appreciated. Jack


Leonard Caillouet June 24th 07 04:20 PM

mitsubishi 52525 and over the air signal
 
Get a better antenna and check to see if there are any firmware updates from
Mitsubishi that might affect the problem. Could be a bad DM module or
signal board. Has the unit ever had trouble getting past the boot cycle?

Leonard

wrote in message
oups.com...
I am getting a message and a blue screen telling me that the channel
is not available however, when I unplug the tv and replug it in the
channels are all there including the HD local channels out of NY and
Philly. I know that it is bad for the bulb life doing this. I just
replaced the bulb after approx 1000 hours. Any suggestions would be
appreciated. Jack





All times are GMT +1. The time now is 04:20 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter