Hello!
TWO monitors, same problem.
The first one: Sony multiscan E400, 19" chassis F99. This chassis is common
with those other CRT computer display:

IBM 6551 models
SONY E400/E400E/G400
COMPAQ P900
DELL P991

The second: Sony Multiscan E500, 21", G1 chassis. The same chassis of:

ELSA ECOMO730
SONY CPD-G500
COMPAQ P1110
DELL P1110
IBM 6552 models

The problem is the same: I noted a distorsion of the picture in the top
right corner of the image.
In the corner, the image is quite "smallest" than in the other part of the
monitor. It is like "pushed", and it is very out of convergence (only in
this point).
I know that is very difficult to find a solution of the problem without
seeing the monitor, but I think that someone could find a similar problem in
a similar screen.
Thank you!

"Starflex" wrote in message
...
Hello!
TWO monitors, same problem.
The first one: Sony multiscan E400, 19" chassis F99. This chassis is
common with those other CRT computer display:

IBM 6551 models
SONY E400/E400E/G400
COMPAQ P900
DELL P991

The second: Sony Multiscan E500, 21", G1 chassis. The same chassis of:

ELSA ECOMO730
SONY CPD-G500
COMPAQ P1110
DELL P1110
IBM 6552 models

The problem is the same: I noted a distorsion of the picture in the top
right corner of the image.
In the corner, the image is quite "smallest" than in the other part of the
monitor. It is like "pushed", and it is very out of convergence (only in
this point).
I know that is very difficult to find a solution of the problem without
seeing the monitor, but I think that someone could find a similar problem
in a similar screen.
Thank you!

That can be due to an external magnetic field ... but with two monitors, I
am puzzled. Any chance you are testing both monitors in an environment with
a magnetic field? Is something sitting on them or near the corner?

Charles wrote:

That can be due to an external magnetic field ... but with two
monitors, I am puzzled. Any chance you are testing both monitors in
an environment with a magnetic field? Is something sitting on them
or near the corner?

Hi charles, thank you for your reply!
No, I have tryed the monitors in some different place...the problem
persists.. :-(
Of course, also with different PC, to exclude a VGA damage...

On Jun 13, 3:18 pm, "Starflex" wrote:
Hello!
TWO monitors, same problem.
The first one: Sony multiscan E400, 19" chassis F99. This chassis is common
with those other CRT computer display:

IBM 6551 models
SONY E400/E400E/G400
COMPAQ P900
DELL P991

The second: Sony Multiscan E500, 21", G1 chassis. The same chassis of:

ELSA ECOMO730
SONY CPD-G500
COMPAQ P1110
DELL P1110
IBM 6552 models

The problem is the same: I noted a distorsion of the picture in the top
right corner of the image.
In the corner, the image is quite "smallest" than in the other part of the
monitor. It is like "pushed", and it is very out of convergence (only in
this point).
I know that is very difficult to find a solution of the problem without
seeing the monitor, but I think that someone could find a similar problem in
a similar screen.
Thank you!

Check R053.

tekman2006 wrote:

Check R053.

In the 19" or on the 21" ?