Hello All

I need to find a source for a small fluorescent "U" lamp that measures
2 1/2 inches in its U shape and the tube diameter is 7/16 inches. A
single wire comes out each end and ithe wires are soldered to the pcb.
This lamp is in the base of a small statue. The electronic ballast is
powered by a 9 volt wall wort. The ballast is putting out about 1000
volts which is the starting voltage for this type of lamp according to
a pdf file I found for this type of ballast. I measured at the wires
where they enter the tube.
http://www.nalanda.nitc.ac.in/indust...Zetex/dn22.pdf
The voltage is supposed to drop to 500 volts ac when the lamp ignites.
Thanks in advance.

gagnonrchrd

wrote in message
ups.com...
Hello All

I need to find a source for a small fluorescent "U" lamp that measures
2 1/2 inches in its U shape and the tube diameter is 7/16 inches. A
single wire comes out each end and ithe wires are soldered to the pcb.
This lamp is in the base of a small statue. The electronic ballast is
powered by a 9 volt wall wort. The ballast is putting out about 1000
volts which is the starting voltage for this type of lamp according to
a pdf file I found for this type of ballast. I measured at the wires
where they enter the tube.
http://www.nalanda.nitc.ac.in/indust...Zetex/dn22.pdf
The voltage is supposed to drop to 500 volts ac when the lamp ignites.
Thanks in advance.

gagnonrchrd


Check out sign shops.
They make custom bulbs all day long.