Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
OT Source for 3m 214 epoxy in small quantities needed
For bonding ceramic to metal, high temp, single part heat cured,
apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark |
#2
|
|||
|
|||
Mark wrote:
For bonding ceramic to metal, high temp, single part heat cured, apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark What's the shelf life? I've learned the hard way with adhesives to try to buy 'em fresh and use 'em up. GWE |
#3
|
|||
|
|||
12 months @ 40 deg f. Better than many things. Too short for a case
for MY use; a lifetime supply might be 2 packets. Wafer source on ebay, seller steminc, 2 wafers (50mmx3mm, 45kHz res freq, pair for about 16.00. Perhaps all those folks pondering cleaning tanks for all these years might be motivated to grab a restaurant steam table insert... / mark Grant Erwin wrote: Mark wrote: For bonding ceramic to metal, high temp, single part heat cured, apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark What's the shelf life? I've learned the hard way with adhesives to try to buy 'em fresh and use 'em up. GWE |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Seeking a source for small bore rubber or silcone tubing. | UK diy | |||
looking for small steel square tubing source | Metalworking |