Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but
the material must be soft and resilient. About 6m needed but short lengths (not less than 150mm) will do. Anybody help please? TIA Nick. |
#2
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
Model shop - model aircraft fuel tube?
Mike "Nick L. O'Deon" wrote in message = ... OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made = of but the material must be soft and resilient. About 6m needed but short = lengths (not less than 150mm) will do. Anybody help please? TIA =20 Nick. =20 |
#3
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
"Mike John" wrote in message news:Lu4xc.121$lz5.86@newsfe4-gui... Model shop - model aircraft fuel tube? Mike "Nick L. O'Deon" wrote in message ... OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but the material must be soft and resilient. About 6m needed but short lengths (not less than 150mm) will do. Anybody help please? TIA Nick. Thanks Mike, already tried the only model shop in the area and their stuff has the right properties but is too large at about 5mm od. Their suppliers could not offer anything smaller. Nick |
#4
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
On Mon, 7 Jun 2004 20:34:00 +0100, "Nick L. O'Deon" wrote:
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but the material must be soft and resilient. About 6m needed but short lengths (not less than 150mm) will do. Anybody help please? TIA Nick. Electrical sleeving e.g. RS components 399-401, in 15m reels. 2mm od, 1mm id. http://rswww.com |
#5
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
Nick L. O'Deon wrote:
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but the material must be soft and resilient. About 6m needed but short lengths (not less than 150mm) will do. Anybody help please? http://www.silex.co.uk/ Awful website, but they do what you want. -- Grunff |
#6
|
|||
|
|||
Seeking a source for small bore rubber or silcone tubing.
On Mon, 7 Jun 2004 20:34:00 +0100, "Nick L. O'Deon"
wrote: OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but the material must be soft and resilient. About 6m needed but short lengths (not less than 150mm) will do. Anybody help please? Hi, Try a search for rubber sleeving: http://www.google.com/search?&q=site...ubber+sleeving will yield something like: http://www.oldtimesupplies.co.uk/otsw/bits_18.htm cheers, Pete. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Silicon rubber tubing | UK diy |