Seeking a source for small bore rubber or silcone tubing.
 

OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but
the material must be soft and resilient. About 6m needed but short lengths
(not less than 150mm) will do.
Anybody help please?
TIA

Nick.

Seeking a source for small bore rubber or silcone tubing.
 

Model shop - model aircraft fuel tube?

Mike

"Nick L. O'Deon" wrote in message =
...
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made =
of but
the material must be soft and resilient. About 6m needed but short =
lengths
(not less than 150mm) will do.
Anybody help please?
TIA
=20
Nick.
=20

Seeking a source for small bore rubber or silcone tubing.
 

"Mike John" wrote in message news:Lu4xc.121$lz5.86@newsfe4-gui...
Model shop - model aircraft fuel tube?

Mike

"Nick L. O'Deon" wrote in message
...
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of
but
the material must be soft and resilient. About 6m needed but short
lengths
(not less than 150mm) will do.
Anybody help please?
TIA

Nick.

Thanks Mike, already tried the only model shop in the area and their stuff
has the right properties but is
too large at about 5mm od. Their suppliers could not offer anything
smaller.

Nick

Seeking a source for small bore rubber or silcone tubing.
 

On Mon, 7 Jun 2004 20:34:00 +0100, "Nick L. O'Deon" wrote:

OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but
the material must be soft and resilient. About 6m needed but short lengths
(not less than 150mm) will do.
Anybody help please?
TIA

Nick.

Electrical sleeving e.g. RS components 399-401, in 15m reels. 2mm od, 1mm id.
http://rswww.com

Seeking a source for small bore rubber or silcone tubing.
 

Nick L. O'Deon wrote:
OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but
the material must be soft and resilient. About 6m needed but short lengths
(not less than 150mm) will do.
Anybody help please?

http://www.silex.co.uk/
Awful website, but they do what you want.

--
Grunff

Seeking a source for small bore rubber or silcone tubing.
 

On Mon, 7 Jun 2004 20:34:00 +0100, "Nick L. O'Deon"
wrote:

OD not more than 2.5mm. ID 0.5-1.0mm. Doesn't matter what it is made of but
the material must be soft and resilient. About 6m needed but short lengths
(not less than 150mm) will do.
Anybody help please?

Hi,

Try a search for rubber sleeving:

http://www.google.com/search?&q=site...ubber+sleeving

will yield something like:

http://www.oldtimesupplies.co.uk/otsw/bits_18.htm

cheers,
Pete.