OT Source for 3m 214 epoxy in small quantities needed
For bonding ceramic to metal, high temp, single part heat cured,
apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark |
Mark wrote:
For bonding ceramic to metal, high temp, single part heat cured, apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark What's the shelf life? I've learned the hard way with adhesives to try to buy 'em fresh and use 'em up. GWE |
12 months @ 40 deg f. Better than many things. Too short for a case
for MY use; a lifetime supply might be 2 packets. Wafer source on ebay, seller steminc, 2 wafers (50mmx3mm, 45kHz res freq, pair for about 16.00. Perhaps all those folks pondering cleaning tanks for all these years might be motivated to grab a restaurant steam table insert... / mark Grant Erwin wrote: Mark wrote: For bonding ceramic to metal, high temp, single part heat cured, apparently comes in 6x6oz packets /tubes in a 120.00 or higher carton. Need only one - anyone using this stuff? Anyone want to share a carton? /mark What's the shelf life? I've learned the hard way with adhesives to try to buy 'em fresh and use 'em up. GWE |
All times are GMT +1. The time now is 10:44 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter