Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
25" Sanyo tv
I have a Sanyo 25PN1 TV "Modal C25EG77NE" Chassis EB4-A25
When I power it up the standby LED comes on, but when I press the channel change buttons or use the remote the LED flashes. I have replaced R621 as it was O/C. Can any help Joe |
#2
Posted to sci.electronics.repair
|
|||
|
|||
25" Sanyo tv
I had one with a bad flyback, came on, shut right down,
with some high voltage. Check B+ @ horiz output, the drive, & regulated B+. With no info from you, it's hard to help you. The led lights because the 5 volt lin, & possibly other standby voltages are there. Sky. "joe" wrote in message oups.com... I have a Sanyo 25PN1 TV "Modal C25EG77NE" Chassis EB4-A25 When I power it up the standby LED comes on, but when I press the channel change buttons or use the remote the LED flashes. I have replaced R621 as it was O/C. Can any help Joe |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sanyo LCD double image | Electronics Repair | |||
SANYO LCD projector - repair question | Electronics Repair | |||
Ticking sound from Sanyo 27'' TV | Electronics Repair | |||
Sanyo cordless phone CLT-2430: Talk button problems | Electronics Repair | |||
Sanyo belts | Electronics Repair |