 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Mitsubishi HS-u53 VCR has jerky picture
I'm having trouble with a Mitsubishi HS-u53 VCR. For the
past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? |
|
#2
|
|||
|
|||
|
Mikey writes:
I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
|
#3
|
|||
|
|||
|
Modeswitch or bad sensor?
"Sam Goldwasser" wrote in message ... Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
|
#4
|
|||
|
|||
|
Sam Goldwasser wrote: Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. I took the bottom cover off of the VCR to check the belt, and the belt looks okay. I took the belt off, and it doesn't look like it's stretched. I played a tape with the bottom cover of the VCR off so I could try to see if the belt was slipping, and it didn't seem to be, I couldn't see any slipping. Fast forward and rewind work fine. |
|
#5
|
|||
|
|||
|
How would I check to see if either of these were causing the problem?
pertnoy wrote: Modeswitch or bad sensor? "Sam Goldwasser" wrote in message ... Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
|
#6
|
|||
|
|||
|
Tro it inda gabbage.
"Mikey" wrote in message ... Sam Goldwasser wrote: Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. I took the bottom cover off of the VCR to check the belt, and the belt looks okay. I took the belt off, and it doesn't look like it's stretched. I played a tape with the bottom cover of the VCR off so I could try to see if the belt was slipping, and it didn't seem to be, I couldn't see any slipping. Fast forward and rewind work fine. |
|
#7
|
|||
|
|||
|
I would, but it might hit you in the head while you're scrounging for food.
Barny Rubble wrote: Tro it inda gabbage. "Mikey" wrote in message ... Sam Goldwasser wrote: Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. I took the bottom cover off of the VCR to check the belt, and the belt looks okay. I took the belt off, and it doesn't look like it's stretched. I played a tape with the bottom cover of the VCR off so I could try to see if the belt was slipping, and it didn't seem to be, I couldn't see any slipping. Fast forward and rewind work fine. |
|
#8
|
|||
|
|||
|
Good retort!
Mark Z. P.S. These Mits's also had pinch roller problems, and a juerky picture is sometimes caused by the felt coming off the back-tension band (around the left hub). Mikey wrote: I would, but it might hit you in the head while you're scrounging for food. Barny Rubble wrote: Tro it inda gabbage. "Mikey" wrote in message ... Sam Goldwasser wrote: Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. I took the bottom cover off of the VCR to check the belt, and the belt looks okay. I took the belt off, and it doesn't look like it's stretched. I played a tape with the bottom cover of the VCR off so I could try to see if the belt was slipping, and it didn't seem to be, I couldn't see any slipping. Fast forward and rewind work fine. |
|
#9
|
|||
|
|||
|
I'll open up the VCR again and check the felt on the back tension band.
Thanks for the info, Mark. "Mark D. Zacharias" wrote: Good retort! Mark Z. P.S. These Mits's also had pinch roller problems, and a juerky picture is sometimes caused by the felt coming off the back-tension band (around the left hub). Mikey wrote: I would, but it might hit you in the head while you're scrounging for food. Barny Rubble wrote: Tro it inda gabbage. "Mikey" wrote in message ... Sam Goldwasser wrote: Mikey writes: I'm having trouble with a Mitsubishi HS-u53 VCR. For the past couple months, sometimes when putting a tape in the VCR, the VCR would shut off. After powering it back on, the tape would be ejected. Pushing the tape back in would usually work and the VCR would play. Sometimes the VCR would shut down again, but powering it back on and pushing the tape back in would work and the tape would play. Last week was watching a tape, and the VCR shut off. Turned VCR on, after a couple seconds it shut off. After trying this 3 or 4 times, the tape ejected from the VCR. Now when I try to play a tape, it plays, but the picture jerks up and down and about every 5 seconds the picture disappears and all that's on the screen is static. Also, the data counter stays at zero. The idler assembly had to be replaced about 7 years ago, I thought maybe it was giving me trouble again (although the last time, tapes wouldn't play at all), so I opened up the VCR to check, but the idler appears fine. I can't see anything else that appears broken (I didn't really look too closely, though). Anyone have any thoughts on what might be causing this? I'm assuming the U52 and U53 are similar. If that's not the case, ignore this. One thing to check is the main belt underneath. On my HS-U52, it had become stretched and wasn't adequately driving the loading mechanism. There are also lubrication issues but that requires a major disassembly of the parts underneath the dexk and so far I've avoided doing anything but they may first show up as squealing rewind or FF. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. I took the bottom cover off of the VCR to check the belt, and the belt looks okay. I took the belt off, and it doesn't look like it's stretched. I played a tape with the bottom cover of the VCR off so I could try to see if the belt was slipping, and it didn't seem to be, I couldn't see any slipping. Fast forward and rewind work fine. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Mitsubishi TV horizontal picture size | Electronics Repair | |||
| Mitsubishi VS4507R Crppy Picture - 123_2391.JPG (0/1) - 123_2391.JP | Electronics Repair | |||
| Mitsubishi VS-5071 no picture has sound. | Electronics Repair | |||
| Picture Black - 35" Mitsubishi, Mod #CS-3506R. | Electronics Repair | |||
| ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
Linear Mode
