I would, but it might hit you in the head while you're scrounging for food.

Barny Rubble wrote:

Tro it inda gabbage.
"Mikey" wrote in message
...


Sam Goldwasser wrote:

Mikey writes:

I'm having trouble with a Mitsubishi HS-u53 VCR. For the
past couple months, sometimes when putting a tape in the
VCR, the VCR would shut off. After powering it back on, the
tape would be ejected. Pushing the tape back in would
usually work and the VCR would play. Sometimes the VCR
would shut down again, but powering it back on and pushing
the tape back in would work and the tape would play. Last
week was watching a tape, and the VCR shut off. Turned VCR
on, after a couple seconds it shut off. After trying this 3
or 4 times, the tape ejected from the VCR. Now when I try
to play a tape, it plays, but the picture jerks up and down
and about every 5 seconds the picture disappears and all
that's on the screen is static. Also, the data counter
stays at zero. The idler assembly had to be replaced about
7 years ago, I thought maybe it was giving me trouble again
(although the last time, tapes wouldn't play at all), so I
opened up the VCR to check, but the idler appears fine. I
can't see anything else that appears broken (I didn't really
look too closely, though). Anyone have any thoughts on what
might be causing this?

I'm assuming the U52 and U53 are similar. If that's not the case,
ignore this.

One thing to check is the main belt underneath. On my HS-U52, it
had become stretched and wasn't adequately driving the loading
mechanism. There are also lubrication issues but that requires
a major disassembly of the parts underneath the dexk and so far
I've avoided doing anything but they may first show up as squealing
rewind or FF.

--- sam | Sci.Electronics.Repair FAQ Mirror:
http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents:
http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ:
http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites:
http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the
excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header
above is
ignored unless my full name is included in the subject line. Or, you
can
contact me via the Feedback Form in the FAQs.

I took the bottom cover off of the VCR to check the belt, and the belt
looks
okay.
I took the belt off, and it doesn't look like it's stretched. I played a
tape
with the
bottom cover of the VCR off so I could try to see if the belt was
slipping, and
it
didn't seem to be, I couldn't see any slipping. Fast forward and rewind
work
fine.