Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Panasonic AG-A11 Wired Remote Control
The AG-A11 is a simple wired remote controller for Panasonic VCRs and
camcorders. It has 7 buttons (RECORD, PLAY, REW, FF, STOP, PAUSE, AND SLOW) that each momentarily switch in a resistor to alter the current flowing in a circuit with a 4 volt DC internal supply. Does anyone have a table of the resistances used in this pushbutton controller? Thanks!! |
#2
|
|||
|
|||
Well, I figured out some of the values:
1. STOP is 0 ohms 2. REW is 1.6 kOhms 3. FF is 5.1 kOhms 4. PAUSE is 10 kOhms Once paused, additional pushes of the same button causes the AG-5700 to step through the five SLOW speeds, and the 6th push restores PLAY. What I can't figure out is what resistances are needed to switch from STOP to PLAY, directly to SLOW, and for REC. Any help will be appreciated. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
To anyone sick of alt.hvac | Home Repair | |||
Viesmann MC remote control | Electronics Repair | |||
Modem Test ? | Electronics Repair | |||
How to open Panasonic vcr remote? | Electronics Repair | |||
TV Remote Control rubber pad(UR50CT1071) used in remote control for Panasonic TV Model TX-29GF10X | Electronics Repair |