Panasonic AG-A11 Wired Remote Control
 

The AG-A11 is a simple wired remote controller for Panasonic VCRs and
camcorders. It has 7 buttons (RECORD, PLAY, REW, FF, STOP, PAUSE, AND
SLOW) that each momentarily switch in a resistor to alter the current
flowing in a circuit with a 4 volt DC internal supply. Does anyone have
a table of the resistances used in this pushbutton controller? Thanks!!

Well, I figured out some of the values:

1. STOP is 0 ohms
2. REW is 1.6 kOhms
3. FF is 5.1 kOhms
4. PAUSE is 10 kOhms

Once paused, additional pushes of the same button causes the AG-5700 to
step through the five SLOW speeds, and the 6th push restores PLAY.

What I can't figure out is what resistances are needed to switch from
STOP to PLAY, directly to SLOW, and for REC. Any help will be
appreciated.