Home |
Search |
Today's Posts |
|
Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
I'm looking for a Plier much like an olive or cherry pitter, but with
a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
#2
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
Jim Thompson wrote:
I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. -- Paul Hovnanian ------------------------------------------------------------------ Human beings were created by water to transport it uphill. |
#3
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
"Paul Hovnanian P.E." wrote:
Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. Here is a small Arbor press at Harbor Freight for $50: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=3552 -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
#4
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E."
wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
#5
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
On Mon, 08 Oct 2007 11:47:45 -0400, Jamie
t wrote: Jim Thompson wrote: On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) ...Jim Thompson Get ur self a cheap set of channel lock pliers and weld the pieces you need on the jaws. You must know some one around that can do that for you? Certainly ;-) ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
#6
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
Jim Thompson wrote:
On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) ...Jim Thompson Get ur self a cheap set of channel lock pliers and weld the pieces you need on the jaws. You must know some one around that can do that for you? -- "I'm never wrong, once i thought i was, but was mistaken" Real Programmers Do things like this. http://webpages.charter.net/jamie_5 |
#7
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
GoldIntermetallicEmbrittlement wrote:
You could be a little more retarded, just not as much as you are in this thread. You could be a human, but mot in this lifetime. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
#8
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
Jim Thompson wrote:
On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) OK, Yoda. ;-) I think I know what you are up to. You want something that can punch through the file packaging. The tolerances will probably have to be closer than those for an olive pitter or the foil will just fold around the punch. There are large paper punches sold at some arts an crafts shops that might fit the bill. -- Paul Hovnanian ------------------------------------------------------------------ Smoking is one of the leading causes of statistics. -- Fletcher Knebel |
#9
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
On Tue, 09 Oct 2007 14:57:05 -0700, "Paul Hovnanian P.E."
wrote: Jim Thompson wrote: On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) OK, Yoda. ;-) I think I know what you are up to. You want something that can punch through the file packaging. The tolerances will probably have to be closer than those for an olive pitter or the foil will just fold around the punch. There are large paper punches sold at some arts an crafts shops that might fit the bill. As I write, I'm studying a snap-fastener plier to see if I can adapt it. In the packaging is the frozen food for my salt water fish ;-) ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
#10
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
On Tue, 09 Oct 2007 15:14:33 -0700, AnimalMagic
wrote: On Tue, 09 Oct 2007 14:58:51 -0700, Jim Thompson wrote: On Tue, 09 Oct 2007 14:57:05 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) OK, Yoda. ;-) I think I know what you are up to. You want something that can punch through the file packaging. The tolerances will probably have to be closer than those for an olive pitter or the foil will just fold around the punch. There are large paper punches sold at some arts an crafts shops that might fit the bill. As I write, I'm studying a snap-fastener plier to see if I can adapt it. In the packaging is the frozen food for my salt water fish ;-) ...Jim Thompson Then why would you need a one inch hole? It's cubes, ~1" on the diagonal. ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
#11
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
Jim Thompson wrote:
On Tue, 09 Oct 2007 14:57:05 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: On Sun, 07 Oct 2007 21:22:26 -0700, "Paul Hovnanian P.E." wrote: Jim Thompson wrote: I'm looking for a Plier much like an olive or cherry pitter, but with a larger diameter push-rod and a back-side hole diameter of 1" to 1-1/8" Does such a thing exist? Haven't seen one. Im thinking that the force required to push a 1" diameter punch or whatever through most materials would render a plier configuration less than optimal. I Googled lever press and this popped to the top of the list: http://www.janesvilletool.com/mpdt6000.htm For a 1" hole, I think this is more or less what will be available. Punches and dies sold separately, of course. No intense force needed. Very cold object is foil packaging cuts fingers ;-) OK, Yoda. ;-) I think I know what you are up to. You want something that can punch through the file packaging. The tolerances will probably have to be closer than those for an olive pitter or the foil will just fold around the punch. There are large paper punches sold at some arts an crafts shops that might fit the bill. As I write, I'm studying a snap-fastener plier to see if I can adapt it. In the packaging is the frozen food for my salt water fish ;-) I thought you fed them with annoying posters from s.e.d. -- Paul Hovnanian ------------------------------------------------------------------ Dedicated to the unrestricted propagation of worthless information across the Internet. |
#12
Posted to alt.binaries.schematics.electronic,sci.electronics.design
|
|||
|
|||
Does This Plier Exist?
On Thu, 11 Oct 2007 19:26:56 -0700, "Paul Hovnanian P.E."
wrote: Jim Thompson wrote: On Tue, 09 Oct 2007 14:57:05 -0700, "Paul Hovnanian P.E." wrote: [snip] OK, Yoda. ;-) I think I know what you are up to. You want something that can punch through the file packaging. The tolerances will probably have to be closer than those for an olive pitter or the foil will just fold around the punch. There are large paper punches sold at some arts an crafts shops that might fit the bill. As I write, I'm studying a snap-fastener plier to see if I can adapt it. In the packaging is the frozen food for my salt water fish ;-) I thought you fed them with annoying posters from s.e.d. Nope. It's my son who has the Piranha ;-) ...Jim Thompson -- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice480)460-2350 | | | E-mail Address at Website Fax480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | America: Land of the Free, Because of the Brave |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Does this exist? | UK diy | |||
Does it exist? | Electronics Repair | |||
Does such a beast exist? | Home Repair | |||
"Al Qaeda" does not exist | Home Repair | |||
"Al Qaeda" does not exist | Home Repair |