Home |
Search |
Today's Posts |
|
Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.binaries.schematics.electronic
|
|||
|
|||
help with Speaker wiring...
Hey guys new to the NG, but have been monitoring for a bit. I am in need of
a schematic for a two way floor monitor speaker cabinet....heres the details.....maybe someone can help!!! the box contains : 1 - 15 Inch 250W H325 woofer which is 8 Ohm (Not sure of Brand) 1 - Peizo Tweeter (Horn) Fostex 025H30 also 8 Ohm 1 - AT50H Attenuator L-8 ohm (has three contacts) 2 - 1/4 inch jacks (1 for in, and 1 for out) Mono I am trying to wire it so the tweeter uses the attenuator (I think thats how its supposed to be......correct me if I am wrong) connected to the middle contact of the attenuator is a white component looks like ceramic it says "10W 10-Ohm-J and has an HR in a diamond shape connected to the right side contact on the Attenuator is a Yellow Component that has the following written on it "TI 4.0J 250 VDC/160VAC" This is confusing to me as to the proper wiring of the speaker monitor! Please if you can help....draw me out a basci schematic.......and any advice on better components etc.... I really need this monitor and there is no technician here where I live! Thanks Alot for any help!!!!!!! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speaker | Electronics Repair | |||
Cheapie 2.1 Speaker Set with static in left speaker | Electronics Repair | |||
PC speaker hum | Electronics Repair | |||
Wiring Surround Sound: Speaker Terminal Posts / Wall Plate Combo | Home Repair | |||
12-2 outlet power lines interference with Speaker / Subwoofer in-wall wiring | Home Repair |