Hey guys new to the NG, but have been monitoring for a bit. I am in need of
a schematic for a two way floor monitor speaker cabinet....heres the
details.....maybe someone can help!!!



the box contains :


1 - 15 Inch 250W H325 woofer which is 8 Ohm
(Not sure of Brand)
1 - Peizo Tweeter (Horn) Fostex 025H30 also 8 Ohm
1 - AT50H Attenuator L-8 ohm (has three
contacts)
2 - 1/4 inch jacks (1 for in, and 1 for out) Mono

I am trying to wire it so the tweeter uses the attenuator (I think thats how
its supposed to be......correct me if I am wrong)

connected to the middle contact of the attenuator is a white component looks
like ceramic it says "10W 10-Ohm-J and has an HR in a diamond shape
connected to the right side contact on the Attenuator is a Yellow Component
that has the following written on it "TI 4.0J 250 VDC/160VAC"

This is confusing to me as to the proper wiring of the speaker monitor!

Please if you can help....draw me out a basci schematic.......and any advice
on better components etc.... I really need this monitor and there is no
technician here where I live!



Thanks Alot for any help!!!!!!!