Duane Bozarth wrote in
:

Nate Perkins wrote:
...
I like the General. FYI, they have a large mortiser the 75-075,
which is similar in size and price to the big Powermatic (e.g.,
around $800). They also have a benchtop mortiser that is bigger than
most of the Jet/Deltas ... that's the 75-050. It is moderately
priced (about $320) and has a front clamping holddown and a topside
holddown. For an extra $80 or so there's also a benchtop unit with a
tilting head.

I haven't ever seen the 75-050 listed...what's the capacity? (I know,
I could go look but... )

MODEL 75-050T M1
CHISEL CAPACITY 1/4" TO 5/8" (6 TO 16 mm)
MAXIMUM CHISEL STROKE 9" (228 mm)
DISTANCE FROM FENCE TO CENTER CHISEL 3" (77 mm)
DISTANCE FROM Ø CHISEL TO TABLE (CHISEL 1/4") 6" (152 mm)
CHUCK CAPACITY 1/2" (13 mm)
SIZE OF TABLE 8" X 7 7/8" (203 X 200 mm)
SIZE OF BASE 14" X 8 3/4" (220 X 355 mm)
OVERALL HEIGHT 29" (736 mm)
SPINDLE SPEED 1720 RPM
MOTOR 1/2 HP, 110V, 1 ph, 3.8 A
WEIGHT 76 LBS (42 kg)

Nate Perkins wrote:

Duane Bozarth wrote in
:

Nate Perkins wrote:
...
....
I haven't ever seen the 75-050 listed...what's the capacity? (I know,
I could go look but... )

MODEL 75-050T M1
CHISEL CAPACITY 1/4" TO 5/8" (6 TO 16 mm)
MAXIMUM CHISEL STROKE 9" (228 mm)
DISTANCE FROM FENCE TO CENTER CHISEL 3" (77 mm)
DISTANCE FROM Ø CHISEL TO TABLE (CHISEL 1/4") 6" (152 mm)
CHUCK CAPACITY 1/2" (13 mm)
SIZE OF TABLE 8" X 7 7/8" (203 X 200 mm)
SIZE OF BASE 14" X 8 3/4" (220 X 355 mm)
OVERALL HEIGHT 29" (736 mm)
SPINDLE SPEED 1720 RPM
MOTOR 1/2 HP, 110V, 1 ph, 3.8 A
WEIGHT 76 LBS (42 kg)

Thanks...
Wish I'd known of it when I bought the Delta--would have at least like
to have considered it...only General catalogs I had seen only had the
bigger dood that I was to cheap to spring for...