Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Crown molding on a non-standars ceiling angle
I wasnt to install crown throughout my house. Most will be
straightforward, but there are three walls from which the ceiling makes an angle greater than 90*. They are both ends of the master bedroom and one end of the living room, where the ceiling first goes up from the 8' wall to level off at 9' in the BR and 10' in the LR. I'm not sure how I would make the inside corners match with the adjacent molding, or if it can even be done. I'm a reasonably competent carpenter, and have access to far more competency than my own, along with all the tools and equipment I may need. Thanks for the help. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Crown molding on a cathedral ceiling | Home Repair | |||
How to cut crown molding? | Woodworking | |||
Crown moulding on 12/12 pitch cathedral ceiling | Woodworking | |||
crown molding problem | Woodworking | |||
Crown Molding on an angled ceiling (how to) | Woodworking |