Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Thanx


Charles

Try Baer Lumber in Cedar Grove, NJ.

Regards,
Joe Agro, Jr.
http://www.autodrill.com
http://www.multi-spindle-heads.com

V8013


"U-CDK_CHARLES\Charles" "Charles wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Thanx


Charles

In article 6XPmd.13929$2V4.4276@trndny06, U-CDK_CHARLES\Charles wrote:
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
you, off of 287.

How about Dykes Lumber off route 17 in Mahwa NJ. You should be able to find
their number in the phonebook, before the trip.

Steve

I usually buy my lumber from Monteath Lumber in Old Bridge, NJ.
(monteath.com) They have quite a variety of lumber and carry various
veneered plywood. Spoke to them once in the Spring about cherry veneered
ply my brother wanted. They had it then.

"Ed Clarke" wrote in message
...
In article 6XPmd.13929$2V4.4276@trndny06, U-CDK_CHARLES\Charles wrote:
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
you, off of 287.

Ed Clarke wrote in message ...
In article 6XPmd.13929$2V4.4276@trndny06, U-CDK_CHARLES\Charles wrote:
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
you, off of 287.

Try

US Mahogany

Matawan NJ

Right off GSP 117

Got some great cherry plywood with curl last time I was there

On Wed, 17 Nov 2004 22:05:54 GMT, U-CDK_CHARLES\Charles Charles
wrote:
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .


Welp, all those are farther than I care to drive.

BUT Excelsior (listed as "Jump Lumber" still) in Newton will deliver it
to my inlaws (where I do millwork on Christmas presents)

"Yeah, this here says we have two pieces . .go on back to the shed . ."

Shed Worker: "They said What? Where? Um . . .well . . . " *digs
through some piles of what looks like 1/4" Cherry veneer . . .

So Bob is, if not literally my Uncle, at least passingly familiar with
me and not unkind.

(Jim Galvin) wrote in message . com...
Ed Clarke wrote in message ...
In article 6XPmd.13929$2V4.4276@trndny06, U-CDK_CHARLES\Charles wrote:
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

Condon Lumber in White Plains, NY. Far side of the Tapanzee bridge from
you, off of 287.

Try

US Mahogany

Matawan NJ


You could also try Bayway Lumber in Bayonne, Exit 14A off the Turnpike

"U-CDK_CHARLES\Charles" "Charles wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

South Plainfield too far? This goes back to early '90's, but they're still
listed on the net.

http://www.arcat.com/arcatcos/cos32/arc32162.cfm

"Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind., who
manufactured high end store fixtures, showcases, etc. They have all kinds of
veneered plywood, and stack upon stack of exotic veneers. Might give them a
try.

--
Nahmie
The law of intelligent tinkering: save all the parts.

http://www.willardbrothers.net ... I don't know if they HAVE it, but
they can certainly order it .. in fact, I'll bet any kitchen place
that does its own cabinet construction could order it.


On Sat, 27 Nov 2004 12:04:56 -0500, "Norman D. Crow"
wrote:




"U-CDK_CHARLES\Charles" "Charles wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

South Plainfield too far? This goes back to early '90's, but they're still
listed on the net.

http://www.arcat.com/arcatcos/cos32/arc32162.cfm

"Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind., who
manufactured high end store fixtures, showcases, etc. They have all kinds of
veneered plywood, and stack upon stack of exotic veneers. Might give them a
try.

--
Nahmie
The law of intelligent tinkering: save all the parts.



If I had a really good sig file statement, this is where it would be.

In Aberdeen NJ (exit 117A on Parkway) US Mahogany carries it.

Also ? (sorry can't recall the name of the lumber yard, perhaps someones
else can) on E Hanover Ave in Morristown, NJ carries it

Ken

"Norman D. Crow" wrote in message
...



"U-CDK_CHARLES\Charles" "Charles wrote in message
news:6XPmd.13929$2V4.4276@trndny06...
Wreckers:

Does anyone know anyone who STOCKS cherry veneer plywood in NW NJ or NE
PA? I'm in Newton. I'm willing to drive an hour, so Middleton NY is
okay, but not Albany NY or Lancaster PA . . .

South Plainfield too far? This goes back to early '90's, but they're still
listed on the net.

http://www.arcat.com/arcatcos/cos32/arc32162.cfm

"Eagle Plywood" was one of the co. suppliers when I drove for HBSA Ind.,
who
manufactured high end store fixtures, showcases, etc. They have all kinds
of
veneered plywood, and stack upon stack of exotic veneers. Might give them
a
try.

--
Nahmie
The law of intelligent tinkering: save all the parts.