Hi,

I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money. I am aware it's only got an 8
ins. blade, but I only need to cut thin woods..

Ta,

Sam

On Wed, 17 Nov 2004 07:10:56 -0000, "SB"
vaguely proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email

SB

Maybe you and TB could compare notes?


Hi,

I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money. I am aware it's only got an 8
ins. blade, but I only need to cut thin woods..

Ta,

Sam


************************************************** ***
Dogs are better than people.

People are better than dogs for only one purpose. And
then it's only half of ofthe people. And _then_ most
of them are only ordinary anyway. And then they have a
headache.........

Hi,
I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money. I am aware it's only got an 8
ins. blade, but I only need to cut thin woods..


Poor poor poor England, She kept the pound. Such prices for such rickety crap.
I suggest try to find a decent price on a used mini Ryobi table saw, or on their
current BTS10.

Alex

On Wed, 17 Nov 2004 07:10:56 -0000, "SB"
wrote:

I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money.

Yes, it's a miracle of modern manufacturing that they can make such a
device, drag it halfway around the world, then sell it for a paltry
£40.

Would I use one ? Not if I valued my fingers.

This is A Saw of Last Resort. If I were about to drown on the Titanic,
and this saw was the only chance to build a raft and save myself, then
I _might_ think about using it. But I still wouldn't enjoy it.

I don't have to work wood. I don't make my living from it (Ha !). I
only do it because I _want_ to, and if I used a saw like this, I just
wouldn't want to any more.

You will hate this saw. You will hate it so much that you get
something better, then you will hide this saw away and never touch it
again. You may experience brief pangs of regret that you wasted 40
quid on it.

I don't trust this saw. I like my saws huge and terrifying, because
they're safer that way. I have a very nice saw which weighs more than
I do and took many years before I got it. It will slice my hand off
soon as look at it, but we have this nice understanding that if I
don't put my hand in The Stupid Place it won't do that. In exchange it
chops up anything I feed it, and it does so quickly, powerfully and
safely. This little saw though is not terrifying. It can't slice whole
logs in half with a glance. So any sawing operation with _this_ saw
will be a dangerous arm-wrestling match, as you hope that the motor is
powerful enough to cut the wood, not just to jam, burn or throw it
back at you in a half-hearted last gasp. Feeble saws do not make for
safe working.

Do not buy a powered table saw until you are already using three
different sorts of handsaw. You don't need it. You shouldn't _have_ it
yet. These are real power tools, not toys - they deserve some respect,
and you show that respect by learning to use some of the hand tools
before you dive in and go for the powered version.


If you really have to spend money on buying a powered saw, then look
at the Axminster AWSBS bandsaw (three times the money, I admit).
That'll do useful things for you now, and it'll have some use on the
future too. You'll get your money out of that in a way that I don't
think you'll get your money out of this one.

--
Smert' spamionam

"Andy Dingley" wrote in message
I do and took many years before I got it. It will slice my hand off
soon as look at it, but we have this nice understanding that if I
don't put my hand in The Stupid Place it won't do that.

LOL!

Hi Sam,

I agree with what Andy has to say you shouldn't need a powered saw at the
moment. If you are looking for a circular saw I would forget the one from
machine mart they're often of poor quality. Check out the Perform CCTS10
from axminster. http://www.axminster.co.uk/product.a...=21737&recno=9

Also see whether your teacher will show you how to make a couple of push
sticks and how to use them. Also get your local library to order some books
on the use of circular saws, get the isbn number from this site this should
help them get the right book
http://www.stobartdavies.com/system/index.html

Steve

"SB" wrote in message
...
Hi,

I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money. I am aware it's only got an 8
ins. blade, but I only need to cut thin woods..

Ta,

Sam

Hi Sam,
I agree with what Andy has to say you shouldn't need a powered saw at the
moment. If you are looking for a circular saw I would forget the one from
machine mart they're often of poor quality. Check out the Perform CCTS10
from axminster. http://www.axminster.co.uk/product.a...=21737&recno=9

Definitely the Jet that shows on the same page... of course that should be the
same as around $300

Also see whether your teacher will show you how to make a couple of push
sticks and how to use them. Also get your local library to order some books
on the use of circular saws, get the isbn number from this site this should
help them get the right book
http://www.stobartdavies.com/system/index.html

On Wed, 17 Nov 2004 07:10:56 -0000, "SB"
wrote:

Hi,

I found this table saw for £40
http://www.machinemart.co.uk/product...9&r=2124&g=116 and
thought it looked quite good for the money. I am aware it's only got an 8
ins. blade, but I only need to cut thin woods..

Ta,

Sam



Don't do it.

a good sharp linoleum knife will outperform that piece of crap...

"SB" wrote in message
...


Hi,

I found this table saw for £40

Sam - what's your upper limit? How much can you afford? If you're at the
top of your budget, then you're going to be forced into something like that.
If you can afford more, then I'd *not* buy this one and instead save up for
the one Andy mentioned or something like:
http://www.machinemart.co.uk/product.asp?p=060613002

This is the hard part about buying tools on a budget. The 9" bandsaw I
bought for $99 USD got used, a little bit and served its purpose. But now
that I bought the 14" bandsaw, it lies under the worktable collecting dust.
From one point of view - I "wasted" $99...

Wed, Nov 17, 2004, 1:49pm (EST+5)
(Steve=A0Williams) says:
Hi Sam,
I agree with what Andy has to say you shouldn't need a powered saw at
the moment. If you are looking for a circular saw I would forget the one
from machine mart they're often of poor quality. Check out the Perform
CCTS10 from axminster.
http://www.axminster.co.uk/product.a...1737&recno=3D9 snip

Interesting, different names for the same thing. I have a somewhat
similar saw, with a shop made stand. I use a saw sled, a carbide blade,
and it works fine. The times I use it without the sled, I most
definitely use pushsticks. Usually just cut 'em out of scrap plywood.

However, "this" is what is called a circular saw around my
neighborhood.
http://www.harborfreight.com/cpi/cta...number=3D46866
These work quite nicely, using a straightedge.



JOAT
Measure twice, cut once, swear repeatedly.

On Wed, 17 Nov 2004 19:00:15 GMT, "patrick conroy"
wrote:


"SB" wrote in message
...


Hi,

I found this table saw for £40

Sam - what's your upper limit? How much can you afford? If you're at the
top of your budget, then you're going to be forced into something like that.
If you can afford more, then I'd *not* buy this one and instead save up for
the one Andy mentioned or something like:
http://www.machinemart.co.uk/product.asp?p=060613002

This is the hard part about buying tools on a budget. The 9" bandsaw I
bought for $99 USD got used, a little bit and served its purpose. But now
that I bought the 14" bandsaw, it lies under the worktable collecting dust.
From one point of view - I "wasted" $99...

umm... can I interpret that to mean that the old $99 one is under the
worktable? (I hope)

umm... can I interpret that to mean that the old $99 one is under the
worktable? (I hope)

Yeah... It made sense when it was still in my head... Guess it didn't
translate right to the keyboard

Andy wait until you see the pics I upload to ABPW, if you can get that NG...
A completely Satanic Oliver No. 80. The whole table tilts, has sliding sections
like a built in sled. The motor sounds like something from Star Wars, 5 horse
power and is quiet. The other side of the motor also has a shaft, and a table to
accomodate it which was used for drilling the knob and latch holes in doors, this
could also be used as a borer and a slot mortiser. The whole outfit is so heavy
it is not bolted down. Check ABPW sometime soon, like today this afternoon
your time.

Alex

On Wed, 17 Nov 2004 12:43:19 +0000, Andy Dingley
vaguely proposed a theory
.......and in reply I say!:

remove ns from my header address to reply via email

Good Lord! Support for my little hobby horse again! G

Wot he sed.

Do not buy a powered table saw until you are already using three
different sorts of handsaw. You don't need it. You shouldn't _have_ it
yet. These are real power tools, not toys - they deserve some respect,
and you show that respect by learning to use some of the hand tools
before you dive in and go for the powered version.


If you really have to spend money on buying a powered saw, then look
at the Axminster AWSBS bandsaw (three times the money, I admit).
That'll do useful things for you now, and it'll have some use on the
future too. You'll get your money out of that in a way that I don't
think you'll get your money out of this one.

************************************************** ***
Dogs are better than people.

People are better than dogs for only one purpose. And
then it's only half of ofthe people. And _then_ most
of them are only ordinary anyway. And then they have a
headache.........

I bet I have riped enough 1/4" plywood strips to go across Texas, with
an old Skill circular saw bolted upside down to a 2'x2' piece of 3/4'
plywood or a piece of 1x12 with a 1x2 fence tacked on with a couple of
finish nails , clamped to a pair of saw horses.
I used it for years doing raised paneling back in the 70's... I hated
to have to deal with a real heavy table saw everyday loading an
unloading, carrying it thru the door openings. I still make one every
now and then if I need to ripe up a lot of small trim. I still have all
9.5 fingers too
Tom