Howdy,

I am modifying the look of a 5-panel door. It's a wooden door (douglass fir)
and the panels are glass. I want to glue some new rails that I fabricated
above the old ones. The surfaces to be glued will be both wood and glass.
I will be sanding and painting the door, so imperfections will be hidden.

What kind of glue should I be using? Is there a glue that binds to both
glass and wood? A friend siggested an epoxy (?)

Thanks

-Adrian

On 16 Oct 2004 11:22:32 -0700, (AJ) wrote:

What kind of glue should I be using? Is there a glue that binds to both
glass and wood? A friend siggested an epoxy (?)

Most polyurethane glues will bond glass to wood, such as Gorilla Glue.

Practice on scrap. Read the directions, poly-u glues are different
than the average, and are harmful to humans.

Barry

In article , (AJ) wrote:
Howdy,

I am modifying the look of a 5-panel door. It's a wooden door (douglass fir)
and the panels are glass. I want to glue some new rails that I fabricated
above the old ones. The surfaces to be glued will be both wood and glass.
I will be sanding and painting the door, so imperfections will be hidden.

What kind of glue should I be using? Is there a glue that binds to both
glass and wood? A friend siggested an epoxy (?)

You should be using no glue at all. The rails should be held in place with
brads, and the holes filled with putty. This is because you *want* those rails
to be removable, easily, in case you ever need to replace broken glass.

--
Regards,
Doug Miller (alphageek-at-milmac-dot-com)

Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter
by sending email to autoresponder at filterinfo-at-milmac-dot-com
You must use your REAL email address to get a response.

Silicone can be used for this application.
Note: http://www.thistothat.com for glue advice.

JeffB

AJ wrote:
Howdy,

I am modifying the look of a 5-panel door. It's a wooden door (douglass fir)
and the panels are glass. I want to glue some new rails that I fabricated
above the old ones. The surfaces to be glued will be both wood and glass.
I will be sanding and painting the door, so imperfections will be hidden.

What kind of glue should I be using? Is there a glue that binds to both
glass and wood? A friend siggested an epoxy (?)

Thanks

-Adrian

Silicone can be used for this application.
Note: http://www.thistothat.com for glue advice.


I'd be will to bet that site is is for the promotion od and supported by http://www.lepages.com/
Never heard of them before.

Alex

AAvK wrote:


Silicone can be used for this application.
Note: http://www.thistothat.com for glue advice.


I'd be will to bet that site is is for the promotion od and supported by
http://www.lepages.com/ Never heard of them before.

Been around a long time--I remember them from when I was a little kid. My
recollection is that when you could get the same kind of glue from two or
more manufacturers lepages was generally the last choice. IIRC they also
had crappy imitation Scotch tape.

Alex

--
--John
Reply to jclarke at ae tee tee global dot net
(was jclarke at eye bee em dot net)