Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default battery power table saw


not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong








  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,278
Default battery power table saw

On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong


Personally, I think a battery powered stationary TS is rather lame. If
I want to use a ts, and be bothered carrying around a large tool like
that, I might as well plug it in. Otherwise, circular saws with tails
are good for outside, and a circular saw with battery is great for a
couple of cuts in the shop that don't work well on a normal TS, like
cutting 2" off the ends of a 16 foot 2x, or breaking down a full sheet
of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the battery
would last. He went over everything but that? Dumb on all counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft lady/man/whatever
would be concerned about battery life more than anything else.

--
Jack
Tolerance is the virtue of the man without convictions.
http://jbstein.com
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default battery power table saw

On 2/23/2018 9:30 AM, Jack wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong


Personally, I think a battery powered stationary TS is rather lame.* If
I want to use a ts, and be bothered carrying around a large tool like
that, I might as well plug it in.* Otherwise, circular saws with tails
are good for outside, and a circular saw with battery is great for a
couple of cuts in the shop that don't work well on a normal TS, like
cutting 2" off the ends of a 16 foot 2x, or breaking down a full sheet
of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the battery
would last.* He went over everything but that? Dumb on all counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft lady/man/whatever
would be concerned about battery life more than anything else.


I think this saw is aimed at the trades/new build site that has no
electricity set up yet. Not uncommon at all.
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,278
Default battery power table saw

On 2/23/2018 11:57 AM, Leon wrote:
On 2/23/2018 9:30 AM, Jack wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong


Personally, I think a battery powered stationary TS is rather lame.
If I want to use a ts, and be bothered carrying around a large tool
like that, I might as well plug it in. Otherwise, circular saws with
tails are good for outside, and a circular saw with battery is great
for a couple of cuts in the shop that don't work well on a normal TS,
like cutting 2" off the ends of a 16 foot 2x, or breaking down a full
sheet of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the
battery would last. He went over everything but that? Dumb on all
counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


I think this saw is aimed at the trades/new build site that has no
electricity set up yet. Not uncommon at all.


Right, better to bring a pickup truck full of batteries than a generator
or a temporary hookup that can run all your tools, not just a toy saw.
I don't think it'll be common to see this thing on many building sites,
but that's just my opinion. Obviously some marketing person thinks I'm
wrong. I wish them luck.

--
Jack
Tolerance is the virtue of the man without convictions.
http://jbstein.com
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 12,155
Default battery power table saw

On 2/24/2018 9:45 AM, Jack wrote:
On 2/23/2018 11:57 AM, Leon wrote:
On 2/23/2018 9:30 AM, Jack wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong

Personally, I think a battery powered stationary TS is rather lame.
If I want to use a ts, and be bothered carrying around a large tool
like that, I might as well plug it in.* Otherwise, circular saws with
tails are good for outside, and a circular saw with battery is great
for a couple of cuts in the shop that don't work well on a normal TS,
like cutting 2" off the ends of a 16 foot 2x, or breaking down a full
sheet of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the
battery would last.* He went over everything but that? Dumb on all
counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


I think this saw is aimed at the trades/new build site that has no
electricity set up yet.* Not uncommon at all.


Right, better to bring a pickup truck full of batteries than a generator
or a temporary hookup that can run all your tools, not just a toy saw. I
don't think it'll be common to see this thing on many building sites,
but that's just my opinion.* Obviously some marketing person thinks I'm
wrong.* I wish them luck.


Battery charge life should not be an issue for the trimmer.


  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default battery power table saw

On Sat, 24 Feb 2018 11:08:42 -0600, Leon lcb11211@swbelldotnet
wrote:

On 2/24/2018 9:45 AM, Jack wrote:
On 2/23/2018 11:57 AM, Leon wrote:
On 2/23/2018 9:30 AM, Jack wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong

Personally, I think a battery powered stationary TS is rather lame.
If I want to use a ts, and be bothered carrying around a large tool
like that, I might as well plug it in.* Otherwise, circular saws with
tails are good for outside, and a circular saw with battery is great
for a couple of cuts in the shop that don't work well on a normal TS,
like cutting 2" off the ends of a 16 foot 2x, or breaking down a full
sheet of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the
battery would last.* He went over everything but that? Dumb on all
counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


I think this saw is aimed at the trades/new build site that has no
electricity set up yet.* Not uncommon at all.


Right, better to bring a pickup truck full of batteries than a generator
or a temporary hookup that can run all your tools, not just a toy saw. I
don't think it'll be common to see this thing on many building sites,
but that's just my opinion.* Obviously some marketing person thinks I'm
wrong.* I wish them luck.


Battery charge life should not be an issue for the trimmer.


Yeah, I had a little Makita 3-3/8" 9.6V circular saw. It was great
for cedar siding (what I bought it for) but wasn't worth a damn on
3/4" ply. It did it's job and was small enough to use when working on
a ladder. I no longer have the house so there isn't much use for the
saw, either.

I now have a Dewalt ~6" cordless saw. It's OK for plywood but not
much. The same motor, mounted in a table, would probably work quite
well for trim. Decent Li-Ion batteries, rather than the wimpy NiCds
would do wonders, too.

  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 14,845
Default battery power table saw

On Friday, February 23, 2018 at 10:30:42 AM UTC-5, Jack Stein wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong


Personally, I think a battery powered stationary TS is rather lame. If
I want to use a ts, and be bothered carrying around a large tool like
that, I might as well plug it in. Otherwise, circular saws with tails
are good for outside, and a circular saw with battery is great for a
couple of cuts in the shop that don't work well on a normal TS, like
cutting 2" off the ends of a 16 foot 2x, or breaking down a full sheet
of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the battery
would last. He went over everything but that? Dumb on all counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft lady/man/whatever
would be concerned about battery life more than anything


If the battery lasts or you have multiples or a way to charge them (lots of if's) then I can
see a use in remote sites such as a cabin build or a dock by a pond. Yes, a generator could
be hauled in, but that requires cords and gas and certainly more weight.

I've been on a build where we brought supplies and tools in with 4 wheelers and small trailers
via rough trails. I remember my buddy telling me that getting the generator there was a real
pain. He left it at the cabin for occasional use, but it sure disturbs the peace and quiet. A wood
stove and lanterns were the norm.
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default battery power table saw

On Fri, 23 Feb 2018 10:30:34 -0500
Jack wrote:

Personally, I think a battery powered stationary TS is rather lame.


it really is in the sense that use cases are so limited

Moreover, about my only concern with that piece is how long the
battery would last. He went over everything but that? Dumb on all


not a great review and he blabbed on about stuff that he thought
viewers cared about


Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a
wood worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


one use case is when doing work when the house is changing tenancy and
the power is not on yet








  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 524
Default battery power table saw

On Fri, 23 Feb 2018 10:49:06 -0800, Electric Comet
wrote:

On Fri, 23 Feb 2018 10:30:34 -0500
Jack wrote:

Personally, I think a battery powered stationary TS is rather lame.


it really is in the sense that use cases are so limited

Moreover, about my only concern with that piece is how long the
battery would last. He went over everything but that? Dumb on all


not a great review and he blabbed on about stuff that he thought
viewers cared about


Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a
wood worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


one use case is when doing work when the house is changing tenancy and
the power is not on yet


Or during construction--if all your tools are cordless you don't need
a generator or temporary power drop.
  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default battery power table saw

On 2/24/18 7:50 AM, J. Clarke wrote:
On Fri, 23 Feb 2018 10:49:06 -0800, Electric Comet
wrote:

On Fri, 23 Feb 2018 10:30:34 -0500 Jack
wrote:

Personally, I think a battery powered stationary TS is rather
lame.


it really is in the sense that use cases are so limited

Moreover, about my only concern with that piece is how long the
battery would last. He went over everything but that? Dumb on
all


not a great review and he blabbed on about stuff that he thought
viewers cared about


Could there be a reason to own one of these, I think possibly a
craft lady/man/whatever might use one for something, but probably
not a wood worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more
than anything else.


one use case is when doing work when the house is changing tenancy
and the power is not on yet


Or during construction--if all your tools are cordless you don't
need a generator or temporary power drop.


Except to charge your batteries. :-)
Seriously, if I went that route, I'd make darn sure I had a LOT of
batteries.

Funny, I just had this discussion last week with a guy with whom I
partnered on a deck repair job. On the 1st day on the job we brought up
the subject of DeWalt's battery CMS and we were both like, "Why on earth
would you ever need something like that."

The next day, we popped a breaker using a portable tablesaw and a
way-too-long and thin extension cord. We spent 30 minutes trying to
find the breaker or GFI receptacle that had popped and couldn't find it.
We both looked at each other and said, at the same time, "I guess now
we know why you'd want a battery powered CMS," and had a good laugh.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com




  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,278
Default battery power table saw

On 2/23/2018 1:49 PM, Electric Comet wrote:
On Fri, 23 Feb 2018 10:30:34 -0500
Jack wrote:

Personally, I think a battery powered stationary TS is rather lame.


it really is in the sense that use cases are so limited

Moreover, about my only concern with that piece is how long the
battery would last. He went over everything but that? Dumb on all


not a great review and he blabbed on about stuff that he thought
viewers cared about


My main concern would be battery life, which he ignored. TS's use a
good bit of juice compared to a little drill. Battery powered circular
saws of which I have one, are nice for a couple of cuts when you don't
feel like digging out and hooking up a regular saw, but not for general
use where *I* think they would go through batteries like a hot knife
through butter. Mine does, I know that. He made exactly one cut through
one piece of wood. Note that on about every single drill review they
drill a billion holes in wood to see how long the battery holds up.
Here, where a normal person should really question battery life on one
of these, he completely ignores it. This tells me that battery life sucks.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a
wood worker with regular tools. My guess is even the craft
lady/man/whatever would be concerned about battery life more than
anything else.


one use case is when doing work when the house is changing tenancy and
the power is not on yet


Yeah, emergency TS use. Limited/no demand for that at best.

--
Jack
Tolerance is the virtue of the man without convictions.
http://jbstein.com
  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,143
Default battery power table saw

On Sat, 24 Feb 2018 11:22:06 -0500
Jack wrote:

My main concern would be battery life, which he ignored. TS's use a
good bit of juice compared to a little drill. Battery powered


the batteries are considered consumables so they want you to buy lots
of them

and if you buy all dewalt you will have spares for other tools

Yeah, emergency TS use. Limited/no demand for that at best.


also in some places power is not on twenty four seven so they would
charge during the day and use after sundown

no question that ts has limited use cases










  #13   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,833
Default battery power table saw

On Sat, 24 Feb 2018 10:49:13 -0800, Electric Comet
wrote:

On Sat, 24 Feb 2018 11:22:06 -0500
Jack wrote:

My main concern would be battery life, which he ignored. TS's use a
good bit of juice compared to a little drill. Battery powered


the batteries are considered consumables so they want you to buy lots
of them

and if you buy all dewalt you will have spares for other tools


If you spend a lot of money for the tools with batteries and chargers,
sure. It's a lot cheaper to buy tools without these, however. One
only needs so many batteries.

Yeah, emergency TS use. Limited/no demand for that at best.


also in some places power is not on twenty four seven so they would
charge during the day and use after sundown

no question that ts has limited use cases









  #14   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,013
Default battery power table saw

I can see the use down at the lake house where you are fixing up stuff.
Can't haul a full one down there.
It is take, use, bring back. Thieves.

Martin

On 2/23/2018 9:30 AM, Jack wrote:
On 2/22/2018 2:39 PM, Electric Comet wrote:

not satisfied with his explanation for that folder over fence addition
is he correct or is there some other reason for that

never have liked gimmicks and maybe it is useful but i cannot see it
especially on time tested setups like a table saw rip fence

https://youtu.be/iAwjCykzS_8


the on off switch problem is somewhat ridiculous

that problem was never encountered in testing or it is a feature
seems hard to believe they missed that problem

or is the videographer using it wrong


Personally, I think a battery powered stationary TS is rather lame.Â* If
I want to use a ts, and be bothered carrying around a large tool like
that, I might as well plug it in.Â* Otherwise, circular saws with tails
are good for outside, and a circular saw with battery is great for a
couple of cuts in the shop that don't work well on a normal TS, like
cutting 2" off the ends of a 16 foot 2x, or breaking down a full sheet
of plywood to fit better on a "real" TS.

Moreover, about my only concern with that piece is how long the battery
would last.Â* He went over everything but that? Dumb on all counts.

Could there be a reason to own one of these, I think possibly a craft
lady/man/whatever might use one for something, but probably not a wood
worker with regular tools. My guess is even the craft lady/man/whatever
would be concerned about battery life more than anything else.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
1968 Craftsman table saw #Table Saw 113 2990301 Keith Nuttle Woodworking 13 January 25th 10 11:56 PM
how to clean a table saw table (or band saw)? Doug Miller Woodworking 14 August 20th 05 12:01 AM
Router Table vs Router Table extension on Table Saw Davemac Woodworking 9 February 3rd 04 06:00 PM
table saw aux table question Bob S. Woodworking 0 September 9th 03 07:11 PM
clean table saw - table PM6564 Woodworking 5 July 14th 03 08:45 PM


All times are GMT +1. The time now is 03:35 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"