Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Delta 28-180
Delta bandsaw replacement motor
1/5 hp 2.5 amp 120 volt 1 ph 60 ha -- for full context, visit https://www.homeownershub.com/woodwo...80-814499-.htm |
#2
Posted to rec.woodworking
|
|||
|
|||
Delta 28-180
On Sunday, February 4, 2018 at 5:14:04 PM UTC-5, Chester Plecha wrote:
Delta bandsaw replacement motor 1/5 hp 2.5 amp 120 volt 1 ph 60 ha California Highway Patrol chase vehicle replacement motor 502 HO Tech Specs Part Number: 12568778 Engine Type: Chevy Big-Block V-8 Displacement (cu. in.): 502 Bore x Stroke (in.): 4.470 x 4.000 Block (P/N 19170540): Cast-iron with four-bolt main caps Crankshaft (P/N 10183723): Forged steel Connecting Rods (P/N 19170198): Forged steel, shot peened Pistons (P/N 12533507): Forged aluminum Camshaft Type (P/N 24502611): Hydraulic roller Camshaft Lift (in.): .510 intake / .540 exhaust Camshaft Duration (@.050 in.): 211° intake / 230° exhaust Cylinder Heads (P/N 12562920): Iron rectangular port; 118-cc chambers Valve Size (in.): 2.190 intake / 1.880 exhaust Compression Ratio: 8.75:1 Rocker Arms (P/N 12523976): Stamped steel Rocker Arm Ratio: 1.7:1 Water Pump (P/N 19168606): Cast-iron, long-style Flexplate (P/N 10185034): 14" Recommended Fuel: Regular Pump Ignition Timing: 32° Total @ 4,000 rpm Maximum Recommended rpm: 5500 Balanced: External |
#3
Posted to rec.woodworking
|
|||
|
|||
Delta 28-180
On Sun, 4 Feb 2018 16:21:59 -0800 (PST), DerbyDad03
wrote: On Sunday, February 4, 2018 at 5:14:04 PM UTC-5, Chester Plecha wrote: Delta bandsaw replacement motor 1/5 hp 2.5 amp 120 volt 1 ph 60 ha California Highway Patrol chase vehicle replacement motor 502 HO Tech Specs Part Number: 12568778 Engine Type: Chevy Big-Block V-8 Displacement (cu. in.): 502 Bore x Stroke (in.): 4.470 x 4.000 Block (P/N 19170540): Cast-iron with four-bolt main caps Crankshaft (P/N 10183723): Forged steel Connecting Rods (P/N 19170198): Forged steel, shot peened Pistons (P/N 12533507): Forged aluminum Camshaft Type (P/N 24502611): Hydraulic roller Camshaft Lift (in.): .510 intake / .540 exhaust Camshaft Duration (@.050 in.): 211° intake / 230° exhaust Cylinder Heads (P/N 12562920): Iron rectangular port; 118-cc chambers Valve Size (in.): 2.190 intake / 1.880 exhaust Compression Ratio: 8.75:1 Rocker Arms (P/N 12523976): Stamped steel Rocker Arm Ratio: 1.7:1 Water Pump (P/N 19168606): Cast-iron, long-style Flexplate (P/N 10185034): 14" Recommended Fuel: Regular Pump Ignition Timing: 32° Total @ 4,000 rpm Maximum Recommended rpm: 5500 Balanced: External Sounds like a hell of a bandsaw! |
#4
Posted to rec.woodworking
|
|||
|
|||
Delta 28-180
On Sunday, February 4, 2018 at 8:00:37 PM UTC-5, wrote:
On Sun, 4 Feb 2018 16:21:59 -0800 (PST), DerbyDad03 wrote: On Sunday, February 4, 2018 at 5:14:04 PM UTC-5, Chester Plecha wrote: Delta bandsaw replacement motor 1/5 hp 2.5 amp 120 volt 1 ph 60 ha California Highway Patrol chase vehicle replacement motor 502 HO Tech Specs Part Number: 12568778 Engine Type: Chevy Big-Block V-8 Displacement (cu. in.): 502 Bore x Stroke (in.): 4.470 x 4.000 Block (P/N 19170540): Cast-iron with four-bolt main caps Crankshaft (P/N 10183723): Forged steel Connecting Rods (P/N 19170198): Forged steel, shot peened Pistons (P/N 12533507): Forged aluminum Camshaft Type (P/N 24502611): Hydraulic roller Camshaft Lift (in.): .510 intake / .540 exhaust Camshaft Duration (@.050 in.): 211° intake / 230° exhaust Cylinder Heads (P/N 12562920): Iron rectangular port; 118-cc chambers Valve Size (in.): 2.190 intake / 1.880 exhaust Compression Ratio: 8.75:1 Rocker Arms (P/N 12523976): Stamped steel Rocker Arm Ratio: 1.7:1 Water Pump (P/N 19168606): Cast-iron, long-style Flexplate (P/N 10185034): 14" Recommended Fuel: Regular Pump Ignition Timing: 32° Total @ 4,000 rpm Maximum Recommended rpm: 5500 Balanced: External Sounds like a hell of a bandsaw! It's for resawing those concrete highway dividers. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|