Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Lexan Plastic-What Solvent to use in Gluing
I always used Methylene Chloride and 10% Acetic acid by volume. The Acetic Acid slows the reaction and evoporation down.
I spaced the joint with 0.01" Pt wire spacer and used a 20cc syringe with a 24 gauge needle with the point ground off. Squirt the solution in the joint and let the surfaces soak for a minute or two (60- 120 seconds). Then pull the spacers out and clamp it up. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Questions about bonding lexan to vinyl. Was What does this mean , on my Lexan? | Home Repair | |||
Gluing plastic to MDF | UK diy | |||
Gluing Rubber to Plastic | Home Repair | |||
What is a good solvent to remove permanent marker on plastic? | Home Repair | |||
Joining PVC Plastic Pipe Solvent Question | Home Repair |