Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

Vic

On Tue, 31 Mar 2015 13:06:45 -0400, wrote:

Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

Vic

Probably your best bet is to DL Windows Virtual PC for Win7 and run XP
in it.. You can get it he
http://www.microsoft.com/en-us/downl...s.aspx?id=3702

I have it and it works but I can't tell you much about it because I
haven't fired it up for at least a year. However, Google and Microsoft
can tell you more than you will ever want to know.

I run Oracle Virtual Machine. With a powerful PC, and a lot of
memory, one can run several OS's at once. I have a Win7 PC with
Oracle VMs running XP, 8.1, and Ubuntu. Oracle VM is more than you
need, I mention it only to explain why I can't give details about Win
Virtual PC running XP - except that it works, is free, and is easy to
install.

Jerry O.

writes:
Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

Vic

Second hit on google search comes up with:

http://www.finewoodworking.com/how-t...alculator.aspx

On 3/31/2015 1:06 PM, wrote:
Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

Vic


Lots of online calculators out there.
http://lmgtfy.com/?q=cove+cut+calculator

The ShopNotes version
(http://www.shopnotes.com/files/issue...lculations.pdf)
provides the formula. I believe the "10" in the denominator is the blade
diameter - change as needed.

On 3/31/2015 11:16 PM, Larry Kraus wrote:
On 3/31/2015 1:06 PM, wrote:
Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

Vic


Lots of online calculators out there.
http://lmgtfy.com/?q=cove+cut+calculator

The ShopNotes version
(http://www.shopnotes.com/files/issue...lculations.pdf)
provides the formula. I believe the "10" in the denominator is the blade
diameter - change as needed.


Forgot to point out that the ShopNotes calculator is actually an Acrobat
form. If you are using a 10" blade, just download it and save it for
future offline use.

Scott Lurndal wrote:
writes:
Years ago I purchased the software " Woodhaven Cove Profiler".This
was to see what the cove would be by using a different six blade on
the tablesaw or changing the feed angle. This software does not work
with Windows 7 and Woodhaven does not have a upgraded version. Does
anybody have this software and have they been able to get it to work
with Winows 7?

Vic

Second hit on google search comes up with:

http://www.finewoodworking.com/how-t...alculator.aspx

Which gives you 20 - count'em, TWENTY - data miners along with access to the
desired applet.

dadiOH

wrote in news:bfklhadesbg1tctm9l2g6o72dj8fs78qeu@
4ax.com:

Years ago I purchased the software " Woodhaven Cove Profiler".This was
to see what the cove would be by using a different six blade on the
tablesaw or changing the feed angle. This software does not work with
Windows 7 and Woodhaven does not have a upgraded version. Does anybody
have this software and have they been able to get it to work with
Winows 7?

I've been using this online version:

http://dknudson.unixcab.org/covecut.html

John