Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
PuckDropper, You asked me to report/review on the "Chemical Splash Goggles" from Lee Valley (on page 224 of their catalog) a few months ago. I wore them for a couple hours while I was sanding some drywall compound recently. Indeed they do not fog. However, my glasses fog inside on them (it looks strange). As I found my (Stanley?) $2-3 goggles totally unusable due to fogging, the Lee Valley product has value. They are a snug fit over my glasses--which are not all that big. But I realized that if that were not a snug fit, then they wouldn't provide as much protection. There is a strip of rubber along the edge of the polycarbonate that makes a comfortable fit to the face. It readily comes off. I presume that it will determine the lifetime of the goggles as I doubt it is replaceable. Let me know if you have any questions I might be able to answer. For $19.50, you can't go too far wrong on this, unless they don't go over your glasses. Bill |
#2
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
Bill wrote in
: PuckDropper, You asked me to report/review on the "Chemical Splash Goggles" from Lee Valley (on page 224 of their catalog) a few months ago. I wore them for a couple hours while I was sanding some drywall compound recently. Indeed they do not fog. However, my glasses fog inside on them (it looks strange). As I found my (Stanley?) $2-3 goggles totally unusable due to fogging, the Lee Valley product has value. They are a snug fit over my glasses--which are not all that big. But I realized that if that were not a snug fit, then they wouldn't provide as much protection. There is a strip of rubber along the edge of the polycarbonate that makes a comfortable fit to the face. It readily comes off. I presume that it will determine the lifetime of the goggles as I doubt it is replaceable. Let me know if you have any questions I might be able to answer. For $19.50, you can't go too far wrong on this, unless they don't go over your glasses. Bill Thanks Bill. The goggles being a tight fit to the glasses isn't too surprising. One pair of chemical splash goggles I have require putting the glasses in the goggles first then putting the entire thing on. (Otherwise it will push the glasses back to an uncomfortable position.) When I get fogging, it's very often the glasses fogging first. It might just be a trait of goggles over glasses. I wonder if some kind of forced ventilation might address it? Something like a small cell-phone vibrator motor and button cell battery, perhaps? I've mostly eliminated the fogging problem by switching to a Trend Airshield Pro. It's got its own drawbacks (weight, comfort) but at least I'm not running in to a safety issue with glasses fogging up halfway through a cut. Puckdropper -- Make it to fit, don't make it fit. |
#3
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
On Fri, 28 Jun 2013 03:20:21 -0400, Bill
I wore them for a couple hours while I was sanding some drywall compound recently. Indeed they do not fog. However, my glasses fog inside on them (it looks strange). Your only recourse would be to get lens with an anti fog coating for your glasses. Can't comment on the effectiveness of such a coating as I've never chosen that option when ordering my eye glasses. |
#4
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
On 28 Jun 2013 07:56:13 GMT, Puckdropper
I've mostly eliminated the fogging problem by switching to a Trend Airshield Pro. It's got its own drawbacks (weight, comfort) but at least I'm not running in to a safety issue with glasses fogging up halfway through a cut. As I mentioned to Bill, you can get an anti fog coating for eyeglasses. ~ Something you might consider the next time you get a prescription filled. |
#7
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
On 6/28/2013 5:40 PM, Bill wrote:
Bill wrote: wrote: On Fri, 28 Jun 2013 03:20:21 -0400, Bill I wore them for a couple hours while I was sanding some drywall compound recently. Indeed they do not fog. However, my glasses fog inside on them (it looks strange). Your only recourse would be to get lens with an anti fog coating for your glasses. Can't comment on the effectiveness of such a coating as I've never chosen that option when ordering my eye glasses. IIRC, my dad used to apply something to his glasses that was intended to prevent fogging. If such a product is available it shouldn't be too hard to track down these days. Bill Here's some stuff with a catchy name: http://www.amazon.com/Crap-Lens-Clea...fog+on+glasses Or one can use a potato, e.g. http://www.wikihow.com/Keep-Car-Wind...Using-a-Potato or http://tinyurl.com/y8hql5f Honest, it's true. Would this face lie to you? mahalo, jo4hn |
#8
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
jo4hn wrote:
On 6/28/2013 5:40 PM, Bill wrote: Bill wrote: wrote: On Fri, 28 Jun 2013 03:20:21 -0400, Bill I wore them for a couple hours while I was sanding some drywall compound recently. Indeed they do not fog. However, my glasses fog inside on them (it looks strange). Your only recourse would be to get lens with an anti fog coating for your glasses. Can't comment on the effectiveness of such a coating as I've never chosen that option when ordering my eye glasses. IIRC, my dad used to apply something to his glasses that was intended to prevent fogging. If such a product is available it shouldn't be too hard to track down these days. Bill Here's some stuff with a catchy name: http://www.amazon.com/Crap-Lens-Clea...fog+on+glasses Or one can use a potato, e.g. http://www.wikihow.com/Keep-Car-Wind...Using-a-Potato or http://tinyurl.com/y8hql5f Honest, it's true. Would this face lie to you? mahalo, jo4hn Thanks, I may give it a try sometime. Bill |
#9
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
Bill wrote:
Here's some stuff with a catchy name: http://www.amazon.com/Crap-Lens-Clea...fog+on+glasses Very cool - but... an old scuba diving trick that has worked for decades, and continues to work just as well as any commercial product out there - your own spit. Clean your lens, and then do it... spit on the inside of the lens. Smear it around, rinse it out, then gently dry it. Don't try to rub out all traces of your spit while you dry it - simply dry it. Fog free - guaranteed. It's time proven, and it works. It's really the very same principal as the commercial products, but it's a bunch cheaper. Despite the marketing claims from the manufacturers of $8 per oz stuff - what they offer has no advantage over the time honored techniques. -- -Mike- |
#10
Posted to rec.woodworking
|
|||
|
|||
Ping: PuckDropper
On these hot days, it's difficult enough keeping your whistle wet, much less having extra spit to wet your goggles. You might assist your tongue, with some beers, for producing a sufficient amount of spit.
Sonny |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ping - Bob F | Woodworking | |||
ping TMH | UK diy | |||
Ping:MrP | UK diy | |||
Fly by night PING PING | Woodworking | |||
Ping Ned S | Metalworking |