Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
Don't ask me how it happened, but I lined a walnut bowl with saran to
protect it from something, and the saran 'melted' onto the bowl. What can I use to remove it? I am no good at sanding etc, so that would have to go to a pro if that's the only solution. Thanks. |
#2
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
On Tue, 5 Jun 2012 12:47:04 -0700 (PDT), Kalmia
wrote: Don't ask me how it happened, but I lined a walnut bowl with saran to protect it from something, and the saran 'melted' onto the bowl. What can I use to remove it? I am no good at sanding etc, so that would have to go to a pro if that's the only solution. Mount in on the lathe and take a shallow cut. The plastic is likely melted into the pores of the wood, so it will have to be removed. -- Silence is more musical than any song. -- Christina Rossetti |
#3
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
Kalmia wrote:
Don't ask me how it happened, but I lined a walnut bowl with saran to protect it from something, and the saran 'melted' onto the bowl. What can I use to remove it? I am no good at sanding etc, so that would have to go to a pro if that's the only solution. Thanks. Of course, that is assuming you can rechuck it. If you do not feel right/comfortable rechucking and just peeling the topmost layer of wood off the bowl, try power sanding and refinishing. Deb |
#4
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
On Tue, 05 Jun 2012 16:09:36 -0500, "Dr. Deb"
wrote: Kalmia wrote: Don't ask me how it happened, but I lined a walnut bowl with saran to protect it from something, and the saran 'melted' onto the bowl. What can I use to remove it? I am no good at sanding etc, so that would have to go to a pro if that's the only solution. Thanks. Of course, that is assuming you can rechuck it. If you do not feel right/comfortable rechucking and just peeling the topmost layer of wood off the bowl, try power sanding and refinishing. Deb Why not just find out what the solvent is for the "saran" in question and wash it off? The OP DID say they are no good at sanding. |
#5
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
|
#6
Posted to rec.woodworking
|
|||
|
|||
Wooden bowl with saran 'bonded' to it - help!!
On Tuesday, June 5, 2012 12:47:04 PM UTC-7, Kalmia wrote:
Don't ask me how it happened, but I lined a walnut bowl with saran to protect it from something, and the saran 'melted' onto the bowl. Polyethylene doesn't really dissolve in anything at room temperature, but you could paint the bowl with mineral oil (edible kind, like for a laxative) and hold it under a heat lamp, that will take polyethylene off. Shouldn't hurt the wood. I hope. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Staircase, Wood Molding, Exotic wood, Kitchen shutter, Wooden Bowl,Carving | Woodworking | |||
Staircase, Wood Molding, Exotic wood, Kitchen shutter, Wooden Bowl,Carving | Woodturning | |||
Bonded Waterproofing? | Home Repair | |||
Archaeology of Wooden Bowl | Woodturning | |||
Plastic Food Wrap, what happened to "Saran Wrap"? | Metalworking |