Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Delta parts?
Well, the Delta moving management has hit me.
Somehow or another I bent the shaft on my Delta miter saw. I need to replace the jackshaft assembly. I ordered one from Tool Parts Direct. I have used them before and they are fairly quick, though all Delta parts are backordered. After a week of no action, I called and found out that Delta is moving their parts distribution to SC and everything is at a standstill. Delta can't give an ETA. I called them and they said maybe in 2 weeks (3 weeks ago). I e-mailed Delta to complain. They asked what parts I needed so I replied with that information. Now they won't answer any e-mail from me. I'm stuck. It has been over a month and I have no idea if I will even be able to aquire the part or when, if ever. Arrrrrrgh! Should I just trash this tool and buy another with some other name on the side? Are all my Delta tools now just so much junk. |
#2
Posted to rec.woodworking
|
|||
|
|||
Delta parts?
On Nov 30, 10:45*am, Ray wrote:
Should I just trash this tool and buy another with some other name on the side? *Are all my Delta tools now just so much junk. Kinda seems like you are answering your own question, there. Due to their precipitous fall in quality, I haven't bought Delta tools in years. And now they seem to be just another Chinese tool maker, and not a good one at that. I would look around. There are a lot of nice miter saws out there now, and some are very affordable. I use the DeWalt 10" and love it. I took apart the base/mast assembly and adjusted it to get the miters as close to perfect as I could when I got it, and it has held those settings for about 7 years at this point. I really take care of that one and baby it as much as possible. I have a fellow contractor buddy that uses a HF compound bevel saw he bought for $99 and he loves that. (In fairness, he did take it home, take it apart, clean it, adjust it, lube it and reassemble to his satisfaction). I try not to throw good money after bad. I usually won't fix a tool if I can't get any support for it. Robert |
#3
Posted to rec.woodworking
|
|||
|
|||
Delta parts?
On Nov 30, 11:45*am, Ray wrote:
Well, the Delta moving management has hit me. Somehow or another I bent the shaft on my Delta miter saw. *I need to replace the jackshaft assembly. *I ordered one from Tool Parts Direct. I have used them before and they are fairly quick, though all Delta parts are backordered. *After a week of no action, I called and found out that Delta is moving their parts distribution to SC and everything is at a standstill. *Delta can't give an ETA. *I called them and they said maybe in 2 weeks (3 weeks ago). I e-mailed Delta to complain. They asked what parts I needed so I replied with that information. Now they won't answer any e-mail from me. I'm stuck. *It has been over a month and I have no idea if I will even be able to aquire the part or when, if ever. Arrrrrrgh! Should I just trash this tool and buy another with some other name on the side? *Are all my Delta tools now just so much junk. I recommend patience. If you decide to replace your failed miter saw with a new one from a different manufacturer, the parts you require will probably miraculously appear. Then you will have two saws. You can then sell one or keep both which will insure that neither will go bad again. This is the soul of things. JoeG |
#4
Posted to rec.woodworking
|
|||
|
|||
Delta parts?
On 11/30/2011 10:45 AM, Ray wrote:
Well, the Delta moving management has hit me. Somehow or another I bent the shaft on my Delta miter saw. I need to replace the jackshaft assembly. I ordered one from Tool Parts Direct. I have used them before and they are fairly quick, though all Delta parts are backordered. After a week of no action, I called and found out that Delta is moving their parts distribution to SC and everything is at a standstill. Delta can't give an ETA. I called them and they said maybe in 2 weeks (3 weeks ago). I e-mailed Delta to complain. They asked what parts I needed so I replied with that information. Now they won't answer any e-mail from me. I'm stuck. It has been over a month and I have no idea if I will even be able to aquire the part or when, if ever. Arrrrrrgh! Should I just trash this tool and buy another with some other name on the side? Are all my Delta tools now just so much junk. Believe it or not, check on eBay. There are a couple of Delta parts suppliers who sell there. I bought a brand new motor for my Delta BOSS spindle sander from these folks a year or so ago for $45, about half of what Delta wanted: http://stores.ebay.com/Delta-Tool-Parts-by-tools-rule -- www.eWoodShop.com Last update: 4/15/2010 KarlCaillouet@ (the obvious) http://gplus.to/eWoodShop |
#5
Posted to rec.woodworking
|
|||
|
|||
Delta parts?
On 11/30/2011 10:45 AM, Ray wrote:
Well, the Delta moving management has hit me. Somehow or another I bent the shaft on my Delta miter saw. I need to replace the jackshaft assembly. I ordered one from Tool Parts Direct. I have used them before and they are fairly quick, though all Delta parts are backordered. After a week of no action, I called and found out that Delta is moving their parts distribution to SC and everything is at a standstill. Delta can't give an ETA. I called them and they said maybe in 2 weeks (3 weeks ago). I e-mailed Delta to complain. They asked what parts I needed so I replied with that information. Now they won't answer any e-mail from me. I'm stuck. It has been over a month and I have no idea if I will even be able to aquire the part or when, if ever. Arrrrrrgh! Should I just trash this tool and buy another with some other name on the side? Are all my Delta tools now just so much junk. Delta is kinda in a transition again as they have recently been sold and bought again. On a good note more of their products are being built in the US again on a bad note their manufacturing facility appears to be TINY. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Delta Jointer parts | Woodworking | |||
Delta Parts? | Metalworking | |||
Delta Sidekick Parts | Woodworking | |||
Delta Q3 - missing parts AND Delta no longer stocks or makes them | Woodworking | |||
parts needed for Delta Table Saw | Woodworking |