Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
3D Printing
Fake, or something useful...
http://www.youtube.com/watch?v=ZboxMsSz5Aw |
#2
Posted to rec.woodworking
|
|||
|
|||
3D Printing
"Rita and Neil Ward" wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. |
#3
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 10:54 AM, Ed Pawlowski wrote:
"Rita and Neil Ward" wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. |
#4
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 10:44 AM, k-nuttle wrote:
On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil Ward" wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? |
#5
Posted to rec.woodworking
|
|||
|
|||
3D Printing
Leon wrote:
On 7/9/2011 10:44 AM, k-nuttle wrote: On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? No common scanner will show the axle on which the adjuster turns. Industrial x-ray will. Maybe they touched up the scan to show the hidden parts before feeding it to the printer. If so they glossed over this. -- Gerald Ross Cochran, GA One picture had *better* be worth a thousand words -- it takes up a lot more disk space. |
#6
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 4:32 PM, Gerald Ross wrote:
Leon wrote: On 7/9/2011 10:44 AM, k-nuttle wrote: On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? No common scanner will show the axle on which the adjuster turns. Industrial x-ray will. Maybe they touched up the scan to show the hidden parts before feeding it to the printer. If so they glossed over this. Leon, did you notice the differences in the wrench scanned and the one printed? This one of a wooden statue is a more believable: http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1 |
#7
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sat, 09 Jul 2011 18:12:46 -0400, Rita and Neil Ward
wrote: On 7/9/2011 4:32 PM, Gerald Ross wrote: Leon wrote: On 7/9/2011 10:44 AM, k-nuttle wrote: On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? No common scanner will show the axle on which the adjuster turns. Industrial x-ray will. Maybe they touched up the scan to show the hidden parts before feeding it to the printer. If so they glossed over this. Leon, did you notice the differences in the wrench scanned and the one printed? This one of a wooden statue is a more believable: http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1 Jay Leno has a 3-D printer and loves it. http://www.youtube.com/watch?v=ggvzcGdZsTc Scan, print, and cast from the printed article. Cool. -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles |
#8
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 6:38 PM, Larry Jaques wrote:
On Sat, 09 Jul 2011 18:12:46 -0400, Rita and Neil Ward wrote: On 7/9/2011 4:32 PM, Gerald Ross wrote: Leon wrote: On 7/9/2011 10:44 AM, k-nuttle wrote: On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? No common scanner will show the axle on which the adjuster turns. Industrial x-ray will. Maybe they touched up the scan to show the hidden parts before feeding it to the printer. If so they glossed over this. Leon, did you notice the differences in the wrench scanned and the one printed? This one of a wooden statue is a more believable: http://www.youtube.com/watch?v=07QxFQ3uUFw&NR=1 Jay Leno has a 3-D printer and loves it. http://www.youtube.com/watch?v=ggvzcGdZsTc Scan, print, and cast from the printed article. Cool. -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles After viewing Jay Leno's video, 3D scanning would be something useful. Check out http://www.nextengine.com/. Cool indeed! |
#9
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward
wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw So what am I? Chopped liver? |
#10
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sat, 09 Jul 2011 17:43:10 -0700, Zz Yzx
wrote: On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw So what am I? Chopped liver? http://www.youtube.com/watch?v=umefYctSPS0 giggle -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles |
#11
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 3:32 PM, Gerald Ross wrote:
Leon wrote: On 7/9/2011 10:44 AM, k-nuttle wrote: On 7/9/2011 10:54 AM, Ed Pawlowski wrote: "Rita and Neil wrote in message m... Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw The "printing" of solid objects has been around for a while. This seems to be many levels above though. While it seems impossible to do, so was the box that sits in your living room with the guy inside entertaining you. As said they have been around for a while, however remember these are not working units. While the wrench looked like the real thing, it was only a non working model. Did you not see him adjust the wrench and tighten a nut with it??? No common scanner will show the axle on which the adjuster turns. Industrial x-ray will. Maybe they touched up the scan to show the hidden parts before feeding it to the printer. If so they glossed over this. Well actually and as you pointed out, nothing was common about that set up. |
#12
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/9/2011 10:18 PM, Leon wrote:
Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? -- www.e-woodshop.net Last update: 4/15/2010 KarlC@ (the obvious) |
#13
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/10/2011 5:47 AM, Swingman wrote:
On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Or a, fully working, model of Ashley Judd, maybe? Yeah! |
#14
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sun, 10 Jul 2011 05:47:31 -0500, Swingman wrote:
On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in lust with her after seeing her first flick, _Ruby in Paradise_. Dunno 'bout a working plastic model of her, though... Maybe Real Doll can clone her... http://www.scribd.com/doc/80982/The-Real-Doll (x-rated, don't view this at work unless your boss is a perv, too) snicker -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles |
#15
Posted to rec.woodworking
|
|||
|
|||
3D Printing
Larry Jaques wrote:
On Sun, 10 Jul 2011 05:47:31 -0500, Swingman wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in lust with her after seeing her first flick, _Ruby in Paradise_. Dunno 'bout a working plastic model of her, though... Maybe Real Doll can clone her... http://www.scribd.com/doc/80982/The-Real-Doll (x-rated, don't view this at work unless your boss is a perv, too) snicker -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles And I could use her in the Car Pool Lane too. Nice!!! -- "You can lead them to LINUX but you can't make them THINK" Man. 2010.1 Spring KDE4.4 2.6.33.5-desktop-2mnb |
#16
Posted to rec.woodworking
|
|||
|
|||
3D Printing
"Rich" wrote in message ...
Larry Jaques wrote: On Sun, 10 Jul 2011 05:47:31 -0500, Swingman wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in lust with her after seeing her first flick, _Ruby in Paradise_. Dunno 'bout a working plastic model of her, though... Maybe Real Doll can clone her... http://www.scribd.com/doc/80982/The-Real-Doll (x-rated, don't view this at work unless your boss is a perv, too) snicker -- One word frees us of all the weight and pain of life: That word is love. -- Sophocles And I could use her in the Car Pool Lane too. Nice!!! ============= GEEEEEZZZZZ!! Pull over and park the vehicle first! It's much safer when the vehicle isn't moving!! -- Eric |
#17
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/10/2011 8:24 AM, Larry Jaques wrote:
On Sun, 10 Jul 2011 05:47:31 -0500, wrote: Or a, fully working, model of Ashley Judd, maybe? Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in lust with her after seeing her first flick, _Ruby in Paradise_. "Come Early Morning" ... carrying that jukebox in the back of her pickup until she finally gets it in the double wide in the last scene, drops in a coin and Billy Joe Shaver starts cranking out "I'm Just An Old Chunk Of Coal", while she grabs a long neck sits on the steps, and the credits start rolling. I don't care who you are, that there's symbolic, good ol' boy heaven! -- www.e-woodshop.net Last update: 4/15/2010 KarlC@ (the obvious) |
#18
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Jul 10, 6:47*am, Swingman wrote:
On 7/9/2011 10:18 PM, Leon wrote: * Well actually and as you pointed out, nothing was common about that *set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Okay... I'll bite... where would the sausage go? |
#19
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/10/2011 11:20 AM, Robatoy wrote:
On Jul 10, 6:47 am, wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Okay... I'll bite... where would the sausage go? In the general vicinity of where you'd be biting ... just follow your chin, or nose depending upon your orientation. -- www.e-woodshop.net Last update: 4/15/2010 KarlC@ (the obvious) |
#20
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sun, 10 Jul 2011 10:38:07 -0500, Swingman wrote:
On 7/10/2011 8:24 AM, Larry Jaques wrote: On Sun, 10 Jul 2011 05:47:31 -0500, wrote: Or a, fully working, model of Ashley Judd, maybe? Ooh! Ooh! Ooh! She's one of my favorite women of all time. I fell in lust with her after seeing her first flick, _Ruby in Paradise_. "Come Early Morning" ... carrying that jukebox in the back of her pickup until she finally gets it in the double wide in the last scene, drops in a coin and Billy Joe Shaver starts cranking out "I'm Just An Old Chunk Of Coal", while she grabs a long neck sits on the steps, and the credits start rolling. I don't care who you are, that there's symbolic, good ol' boy heaven! Heh, heh, heh. I'll have to order it. -- Progress is the product of human agency. Things get better because we make them better. Things go wrong when we get too comfortable, when we fail to take risks or seize opportunities. -- Susan Rice |
#21
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Jul 10, 12:50*pm, Swingman wrote:
On 7/10/2011 11:20 AM, Robatoy wrote: On Jul 10, 6:47 am, *wrote: On 7/9/2011 10:18 PM, Leon wrote: * *Well actually and as you pointed out, nothing was common about that * set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? Okay... I'll bite... where would the sausage go? In the general vicinity of where you'd be biting ... just follow your chin, or nose depending upon your orientation. LOL! |
#22
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Sat, 09 Jul 2011 09:44:27 -0400, Rita and Neil Ward
wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw http://reprap.org/wiki/Main_Page has designs for hobbyists that will print copies of itself (or most of it), among other things. |
#23
Posted to rec.woodworking
|
|||
|
|||
3D Printing
In article , Rita and
Neil Ward wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw I have a Makerbot Thing-o-Matic. Very real. I'm building a 3D scanner, so I will soon have a 3D photocopy system... |
#24
Posted to rec.woodworking
|
|||
|
|||
3D Printing
In article , Swingman
wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? I just bought an add-on to my 3D printer that will allow printing in fondant or royal icing (wedding cake toppers?), peanut butter, liver sausage (doggie birthday cakes) or any paste that can be extruded... |
#25
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On 7/11/2011 11:52 PM, Dave Balderstone wrote:
In article2_WdnWbqgbSjHoTTnZ2dnUVZ_uCdnZ2d@giganews. com, Swingman wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? I just bought an add-on to my 3D printer that will allow printing in fondant or royal icing (wedding cake toppers?), peanut butter, liver sausage (doggie birthday cakes) or any paste that can be extruded... I fantasized, and had a recurring dream, as a six year old in 1949, that one day I would own a book that had all the books in the world on it and I could read it without turning pages. The eBook is now a common item. Over 40 years ago, when first introduced to digital computers, I fantasized that one day I could digitize all my prized "stuff" and store them on a computer, instead of on a shelf. Seems like that is also coming to pass ... It's great to be around to see these dreams/fantasy's come true. ITMT,think I'll keep fantasizing/dreaming. Ashely Judd, I'm waiting ... -- www.e-woodshop.net Last update: 4/15/2010 KarlC@ (the obvious) |
#26
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Tue, 12 Jul 2011 05:54:13 -0500, Swingman wrote:
On 7/11/2011 11:52 PM, Dave Balderstone wrote: In article2_WdnWbqgbSjHoTTnZ2dnUVZ_uCdnZ2d@giganews. com, Swingman wrote: On 7/9/2011 10:18 PM, Leon wrote: Well actually and as you pointed out, nothing was common about that set up. Powdered egg and sausage in print cartridges and you can order breakfast over the Internet. Or a, fully working, model of Ashley Judd, maybe? I just bought an add-on to my 3D printer that will allow printing in fondant or royal icing (wedding cake toppers?), peanut butter, liver sausage (doggie birthday cakes) or any paste that can be extruded... I fantasized, and had a recurring dream, as a six year old in 1949, that Crikey, yer ancient! ('53 vintage here) one day I would own a book that had all the books in the world on it and I could read it without turning pages. The eBook is now a common item. And don't you love it? I love it when science fiction and fantasy come to life. I'm extremely impatient waiting for my Mr. Fusion-powered DeLorean, though. Over 40 years ago, when first introduced to digital computers, I fantasized that one day I could digitize all my prized "stuff" and store them on a computer, instead of on a shelf. Seems like that is also coming to pass ... See above. It's great to be around to see these dreams/fantasy's come true. Like dating the Felker (names changed to protect the innocent) -twins- together one night during my 15th year. sated but clothed sigh ITMT,think I'll keep fantasizing/dreaming. Ashely Judd, I'm waiting ... She and Diane Lane (the younger) are just the dreamiest, aren't they? (If only Di had nips...) -- Win first, Fight later. --martial principle of the Samurai |
#27
Posted to rec.woodworking
|
|||
|
|||
3D Printing
On Jul 12, 12:49*am, Dave Balderstone
wrote: In article , Rita and Neil Ward wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw I have a Makerbot Thing-o-Matic. Very real. *I'm building a 3D scanner, so I will soon have a 3D photocopy system... What file format will you be able to export? How big an object will you be able to scan? |
#28
Posted to rec.woodworking
|
|||
|
|||
3D Printing
In article
, Robatoy wrote: On Jul 12, 12:49*am, Dave Balderstone wrote: In article , Rita and Neil Ward wrote: Fake, or something useful... http://www.youtube.com/watch?v=ZboxMsSz5Aw I have a Makerbot Thing-o-Matic. Very real. *I'm building a 3D scanner, so I will soon have a 3D photocopy system... What file format will you be able to export? How big an object will you be able to scan? For the printer, export as .stl, and then the printer s/w converts to gcode for output. I'm not about other formats at this point, as I'm still acquiring the pieces I need and haven't looked at the software (Meshlab). According to the documentation "Meshlab is capable of exporting the watertight mesh into a variety of file formats such as .STL, .OBJ, ..PLY, .3DS and .U3D among others. This makes it a great tool for converting your mesh into a format that can be imported into a 3D modeling program such as 3D Studio Max, Silo 3D, Blender or to integrate your file into .PDF file using Adobe Acrobat 9." As for size I think "that depends". I've seen sample scans of people's heads, and from the waist up. The kit I'm playing with is "experimental". You can follow the links from here http://store.makerbot.com/makerbot-3d-scanner.html if you weant to poke around and see what other folks have been doing with it. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Printing Money? | Metalworking | |||
Light printing on LJ5 | Electronics Repair | |||
Printing the licence | UK diy | |||
Printing on card | UK diy | |||
Printing Schematics | Electronics Repair |