Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Cool Blocks AND/OR/VS roller guides?
I'm rebuilding/setting up my 14" import BS and was wondering what to
use. I had some inexpensive roller guides, but yesterday I scored four cool blocks at a flea market for 50¢. I'm mostly interested in using the BS for resawing (1/2" 3tpi blade). Any preferences? Anyone ever mixed them up, as in roller on top, cool blocks on bottom, or vice versa? Curious, H. |
#2
|
|||
|
|||
Cool Blocks AND/OR/VS roller guides?
I like the roller guides on wider blades and prefer the cool
blocks on very narrow blades, as there is less chance of damaging the blade from running them too close to the working edge. Top vs bottom? Can't say as that would enter into my decision to use a particular type of guide. dave Hylourgos wrote: I'm rebuilding/setting up my 14" import BS and was wondering what to use. I had some inexpensive roller guides, but yesterday I scored four cool blocks at a flea market for 50¢. I'm mostly interested in using the BS for resawing (1/2" 3tpi blade). Any preferences? Anyone ever mixed them up, as in roller on top, cool blocks on bottom, or vice versa? Curious, H. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Band saw cool blocks? | Woodworking | |||
Wood for Childrens Blocks | Woodworking | |||
Question About Cool Blocks | Woodworking | |||
Bandsaw Blade Guide Opinions | Woodworking | |||
SEASONS GREETINGS BLOCKS | Woodworking |