| Home |
| Search |
| Today's Posts |
 |
|
Menu
| Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
| Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
removing pulley
I bought the set of machined pulleys for my delta contractors saw. Any
hints on how to get the nut loose from the saw arbor? I tried vise grips on the shaft, level to try to jamb it against the shaft and housing, and several other things. Can't get enough clearance to get a good grip on it. Maybe removing the top is the next step - but then I'd have to get it aligned - correctly. TIA |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Removing Cassette Deck Capstan Motor Pulley | Electronics Repair | |||
| Pulley blocks | UK diy | |||
| PULLEY MEASUREMENT | Metalworking | |||
| Removing the drive pulley from my MTD Yardbug | Home Repair | |||
| Good Pulley | Woodworking | |||
Threaded Mode
