Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
|
#2
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
GarageWoodworks wrote:
http://www.garagewoodworks.com/video.php Just finished this and thought I'd share. Good job again Brian. What do you use for a camera and mic to make your recordings? -- -Mike- |
#3
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
On Mar 15, 7:27*am, "Mike Marlow"
wrote: GarageWoodworks wrote: http://www.garagewoodworks.com/video.php Just finished this and thought I'd share. Good job again Brian. *What do you use for a camera and mic to make your recordings? Thanks Mike. I use a Sony Digital-8 recorder and a cheap microphone and extension that I got from RadioShack. I'd like to buy a hidef camera, but I need to find a job first. :^) I enjoy making these videos. For the most part they have been woodworking tips only. I might on the next one actually make a small project and film as I go. Who knows. -- -Mike- |
#4
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
nice job on the video--but a question: how do you know the knives are
level lengthwise, if you're only checking the midpoint of each knife? thanks, eric |
#5
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
On 3/19/10 3:15 PM, eag111 wrote:
nice job on the video--but a question: how do you know the knives are level lengthwise, if you're only checking the midpoint of each knife? thanks, eric That magnetic jig holds them at the exact height as the table. The jig is holding the blade on the right and left, so it's level. -- -MIKE- "Playing is not something I do at night, it's my function in life" --Elvin Jones (1927-2004) -- http://mikedrums.com ---remove "DOT" ^^^^ to reply |
#6
Posted to rec.woodworking
|
|||
|
|||
Setting Jointer Knives (A How-to Video)
On Mar 19, 4:48*pm, -MIKE- wrote:
On 3/19/10 3:15 PM, eag111 wrote: nice job on the video--but a question: how do you know the knives are level lengthwise, if you're only checking the midpoint of each knife? thanks, eric That magnetic jig holds them at the exact height as the table. The jig is holding the blade on the right and left, so it's level. -- * -MIKE- * "Playing is not something I do at night, it's my function in life" * * *--Elvin Jones *(1927-2004) * -- *http://mikedrums.com * * ---remove "DOT" ^^^^ to reply Ok--in my experience, tightening the gib screws can skew the knives... |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Setting Planer knives | Woodworking | |||
Jointer Knives | Woodworking | |||
Setting jointer knives, had a thought. | Woodworking | |||
Jointer knives | Woodworking |