Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Align-A-Rip track nuts
I have no idea what kind of nuts I'm actually supposed to use with this
fence, nor where to buy them. In preparing to attach some shop-built accessories to my fence, I needed to solve this problem. No off the shelf hex nuts seemed to fit without spinning, so I fired up my metal bandsaw. I cut some 3/4" wide 3/16" thick cold rolled steel bar stock into suitable widths for a loose but "tight enough" fit in the tracks, then drilled and tapped them for #10-32 machine screws. It proved to be a fun project for my kids to participate in, and I manufactured way more than a lifetime supply of these things. If anyone is in need, I'd be happy to part with my extra stock. They're not made to ultra high tolerances, but they should do the job. (You supply your own #10-32 machine screws of suitable length for whatever application you have in mind.) Email if interested. -- Michael McIntyre ---- Silvan Linux fanatic, and certified Geek; registered Linux user #243621 http://www.geocities.com/Paris/Rue/5407/ |
#2
|
|||
|
|||
Align-A-Rip track nuts
In article ,
Silvan wrote: I have no idea what kind of nuts I'm actually supposed to use with this fence, nor where to buy them. In preparing to attach some shop-built accessories to my fence, I needed to solve this problem. No off the shelf hex nuts seemed to fit without spinning, so I fired up my metal bandsaw. I cut some 3/4" wide 3/16" thick cold rolled steel bar stock into suitable widths for a loose but "tight enough" fit in the tracks, then drilled and tapped them for #10-32 machine screws. It proved to be a fun project for my kids to participate in, and I manufactured way more than a lifetime supply of these things. If anyone is in need, I'd be happy to part with my extra stock. They're not made to ultra high tolerances, but they should do the job. (You supply your own #10-32 machine screws of suitable length for whatever application you have in mind.) I'm not sure what fence you're talking about, but I suspect you want "T-slot nuts". Lee Valley sells them for $1.65 for a bag of 10: http://www.leevalley.com/wood/page.a...1,43455,43830& ccurrency=2&SID= Of course, if making them yourself was a fun project for your and your kids, I'd say you did the right thing making them yourself. |
#3
|
|||
|
|||
Align-A-Rip track nuts
Roy Smith wrote:
I'm not sure what fence you're talking about, but I suspect you want "T-slot nuts". Lee Valley sells them for $1.65 for a bag of 10: I'd say by eyeball, relative to the 3/4" slot in that picture, those are too big. Funny I missed them though. I've looked at that page lotsa times. Sometimes you can't see the forest for the trees. Of course, if making them yourself was a fun project for your and your kids, I'd say you did the right thing making them yourself. Saved money too, probably. I'm not sure what the bar stock cost, or how much for the electricity and tool wear, but anything that can be made without going out to buy something new is more or less free. Especially considering that you and I both know I'd never just order one lousy $1.65 bag of nuts if I were putting together a Lee Valley order. Those would wind up being some really expensive nuts before it was all over. -- Michael McIntyre ---- Silvan Linux fanatic, and certified Geek; registered Linux user #243621 http://www.geocities.com/Paris/Rue/5407/ |
#5
|
|||
|
|||
Align-A-Rip track nuts
Silvan wrote:
I have no idea what kind of nuts I'm actually supposed to use with this fence, nor where to buy them. In preparing to attach some shop-built accessories to my fence, I needed to solve this problem. No off the shelf hex nuts seemed to fit without spinning, so I fired up my metal bandsaw. I cut some 3/4" wide 3/16" thick cold rolled steel bar stock into suitable widths for a loose but "tight enough" fit in the tracks, then drilled and tapped them for #10-32 machine screws. It proved to be a fun project for my kids to participate in, and I manufactured way more than a lifetime supply of these things. If anyone is in need, I'd be happy to part with my extra stock. They're not made to ultra high tolerances, but they should do the job. (You supply your own #10-32 machine screws of suitable length for whatever application you have in mind.) Email if interested. Hmmmmm... wierd Silvan. I had to come up with new attaching hardware for my Align-A-Rip when I built my table extensions and I just grabbed a standard 5/16 (I think...) bolt and stuck the head in the channel the same way that the Sears provided bolts fit in. Ran some nuts up on them and off we went. Since the nuts have the same head shape as the bolts, I would think you could have simply reversed the fastener to accomplish your objective. But... like you said - you turned it into a thing with the kids and that's a better solution. -- -Mike- |
#6
|
|||
|
|||
Align-A-Rip track nuts
Mike Marlow wrote:
Hmmmmm... wierd Silvan. I had to come up with new attaching hardware for my Align-A-Rip when I built my table extensions and I just grabbed a standard 5/16 (I think...) bolt and stuck the head in the channel the same way that the Sears provided bolts fit in. I tried several standard sizes of bolts, but couldn't get one that fit without spinning. 7/16" was the closest, I think. But... like you said - you turned it into a thing with the kids and that's a better solution. Yeah, any day of the week. Now I just have to go re-do all of them. I had a look, and those threads are anything but perpendicular. Don't tell my kids. By the time they're old enough to google up this post, they'll be mature enough to handle it. -- Michael McIntyre ---- Silvan Linux fanatic, and certified Geek; registered Linux user #243621 http://www.geocities.com/Paris/Rue/5407/ |
#7
|
|||
|
|||
Align-A-Rip track nuts
Silvan's going nuts.....
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Box spanner for basin back nuts | UK diy | |||
Halogen track lights - problem. | UK diy | |||
Curtain Track | UK diy | |||
RIGHT WING NUTS vastly outnumber LEFT WING NUTS . | Metalworking | |||
Gib screws and nuts | Metalworking |