I'm looking to confirm a physical measurement from the machine that I can't
get from the manual, parts drawings, etc...

Must have micrometer handy or be skilled in using a caliper when measuring a
tubular / round part section.

Any help would be greatly appreciated and potentially rewarded with a
returned favor, etc.

Thank you.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

Should have mentioned it was a smaller radial arm drill press... Sorry for
the lack of info!

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

I have a Delta 11-100 in good to excellent working order. Do you
think most parts are the same as a Delta 11-090? I can readily email
pics for visual comparison.
Sonny

I thought I had the manual, but not sure, now. I'll check OWWM,
though.
Sonny

Sonny,

Much appreciated. Probably different, but if you want to trade photos, I've
also got some ehre of the 11-090 and some basic but unconfirmed measurements
we can compare...

autodrill ATSIGN yunx DOT com is my direct e-mail.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R


"Sonny" wrote in message
...
I have a Delta 11-100 in good to excellent working order. Do you
think most parts are the same as a Delta 11-090? I can readily email
pics for visual comparison.
Sonny

"Joe AutoDrill" wrote in message
...
I'm looking to confirm a physical measurement from the machine that I
can't get from the manual, parts drawings, etc...

Must have micrometer handy or be skilled in using a caliper when measuring
a tubular / round part section.

Any help would be greatly appreciated and potentially rewarded with a
returned favor, etc.

Thank you.



Well you tried to help me earlier Joe, it finally dawned on me that the
radial DP I am replacing is a Rockwell that eventually was manufactured with
the Delta badge. IF 11-280 can help in any way, let me know.

In article ,
"Joe AutoDrill" wrote:

I'm looking to confirm a physical measurement from the machine that I can't
get from the manual, parts drawings, etc...

Must have micrometer handy or be skilled in using a caliper when measuring a
tubular / round part section.

Any help would be greatly appreciated and potentially rewarded with a
returned favor, etc.

Thank you.

Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

Sold mine last year.....

--
--------------------------------------------------------
Personal e-mail is the n7bsn but at amsat.org
This posting address is a spam-trap and seldom read
RV and Camping FAQ can be found at
http://www.ralphandellen.us/rv

Well you tried to help me earlier Joe, it finally dawned on me that the
radial DP I am replacing is a Rockwell that eventually was manufactured
with the Delta badge. IF 11-280 can help in any way, let me know.

I don't need the 11-280 right now... But I'm also keeping a log of all DP
machiens that I run across so if you (or anyone else for that matter) wants
to measure up your machine and provide specs, it'll be bonus material for
me.

Certainly not necessary though and only offered for the chronically bored.


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

"Joe AutoDrill" wrote in message
...
Well you tried to help me earlier Joe, it finally dawned on me that the
radial DP I am replacing is a Rockwell that eventually was manufactured
with the Delta badge. IF 11-280 can help in any way, let me know.

I don't need the 11-280 right now... But I'm also keeping a log of all DP
machiens that I run across so if you (or anyone else for that matter)
wants to measure up your machine and provide specs, it'll be bonus
material for me.

Certainly not necessary though and only offered for the chronically bored.



I still have the 11-280 right now, if you tell me what you are looking for I
will do my best to provide you with the information.

I still have the 11-280 right now, if you tell me what you are looking for
I will do my best to provide you with the information.

No pressure at all. If it can't be done, no worries at all either.

....But you've got mail.
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R

"Joe AutoDrill" wrote in message
news
I still have the 11-280 right now, if you tell me what you are looking
for I will do my best to provide you with the information.

No pressure at all. If it can't be done, no worries at all either.

...But you've got mail.




NOW you've got mail.

No pressure at all. If it can't be done, no worries at all either.

...But you've got mail.

NOW you've got mail.

So it was *you* who sent me all those bills today?!? grin

Seriously though, thank you for the info. It's going right into my
database. I'll send you a PDF of the drawing we create from that info FYI
in a few days.
--


Regards,
Joe Agro, Jr.
(800) 871-5022
01.908.542.0244
Automatic / Pneumatic Drills: http://www.AutoDrill.com
Multiple Spindle Drills: http://www.Multi-Drill.com
Flagship Site: http://www.Drill-N-Tap.com

V8013-R