Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Delta Mortising Attachment for Ridgid Drill Press
Tim Sauerwein wrote:
I have a Ridgid Drill Press I bought two years ago. It's a floor standing model, I think the size is 13". I'd like to get a mortising attachment and thought the Delta one would work. The Delta says it is for quills measuring 66mm, 50.8mm, 48mm and 38mm. My Drill press quill is 2 3/8" which is about 60mm. Woudl this fit? Does anyone have experience with using a mortising attachment on a Ridgid drill press? I know on the ridgid website there is a mortising attachment, but i couldn't get info on how to order it. Thanks Tim No, it won't fit. Try Grizzly Tools G1370 Mortising Attachment 2-3/8" / 60 MM at $29.95. http://www.grizzly.com/catalog/2005/main/091.aspx -- Jack Novak Buffalo, NY - USA (Remove -SPAM- to send email) |
#2
|
|||
|
|||
Delta Mortising Attachment for Ridgid Drill Press
I have a Ridgid Drill Press I bought two years ago. It's a floor
standing model, I think the size is 13". I'd like to get a mortising attachment and thought the Delta one would work. The Delta says it is for quills measuring 66mm, 50.8mm, 48mm and 38mm. My Drill press quill is 2 3/8" which is about 60mm. Woudl this fit? Does anyone have experience with using a mortising attachment on a Ridgid drill press? I know on the ridgid website there is a mortising attachment, but i couldn't get info on how to order it. Thanks Tim |
#3
|
|||
|
|||
Delta Mortising Attachment for Ridgid Drill Press
In article ,
"no(SPAM)vasys" wrote: catalog Thanks Jack! This looks exactly like what I was looking for. Tim |
#4
|
|||
|
|||
Delta Mortising Attachment for Ridgid Drill Press
Tim Sauerwein wrote:
I have a Ridgid Drill Press I bought two years ago. It's a floor standing model, I think the size is 13". I'd like to get a mortising attachment and thought the Delta one would work. The Delta says it is for quills measuring 66mm, 50.8mm, 48mm and 38mm. My Drill press quill is 2 3/8" which is about 60mm. Woudl this fit? Does anyone have experience with using a mortising attachment on a Ridgid drill press? I know on the ridgid website there is a mortising attachment, but i couldn't get info on how to order it. Thanks Tim HD usually has them stocked in the store. I have one. It works, and that's about all. For a few mortises it's OK. You don't have much down force with a drill press. Ended up buying a dedicated machine. Mucho better. -- Bill Berglin "Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming, 'WOW! What A RIDE!!" ... Unknown |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Review: Delta 17-968 variable speed drill press | Woodworking | |||
Old Delta 14" Floor Drill Press, Questions. | Woodworking | |||
How do I set up a mortising bit on a drill press? | Woodworking | |||
Lubricating Delta DP 350 Drill Press | Woodworking | |||
Bench-top drill press recommendation? and what I found so far. | Metalworking |