Home |
Search |
Today's Posts |
|
Woodworking Plans and Photos (alt.binaries.pictures.woodworking) - Show off or just share photos of your hard work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to alt.binaries.pictures.woodworking
|
|||
|
|||
Compound Angle Box Joint Jig
Angle C is 90 degrees. Angle B is such that it allows the side of the box to
stand perpendicular to the table top. Angle A is such that the both sides of the fingers sit neatly against the slot on both sides of the cut. You'll have to do the math to come up with the angles that work for your project. BTW, the saw blade would be left at 90 degrees (or zero) and the blade would have to be raised high enough above the table to cut the slots. |
#2
Posted to alt.binaries.pictures.woodworking
|
|||
|
|||
Compound Angle Box Joint Jig appendum
"John Grossbohlin" wrote in message ... | Angle C is 90 degrees. Angle B is such that it allows the side of the box to | stand perpendicular to the table top. Angle A is such that the both sides of | the fingers sit neatly against the slot on both sides of the cut. You'll | have to do the math to come up with the angles that work for your project. | BTW, the saw blade would be left at 90 degrees (or zero) and the blade would | have to be raised high enough above the table to cut the slots. I should have added that the fence should be tall enough to support the board and obviously (or maybe not) has to be long enough to support the board completely on both sides of the index pin. I was so caught up in showing the relationship of the fence, the angled support block and the index pin that I neglected to scale the height and length of the fence appropriately. ;~) John |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Compound angle Box Joint | Woodworking | |||
compound angle | Metalworking | |||
Joint compound or plaster | Woodworking | |||
joint compound | Home Repair | |||
Pipe joint compound | Metalworking |