Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Denis Marier
 
Posts: n/a
Default Help, removing tung oil stain

I'll never learn. I was wearing my new shirt when applying tung oil on a
wooden box mounted on the lathe. Then too late some of it went on my new
shirt. ;--(( The probabilities of removing the stain is remote. However,
some of you may have a magic way of removing it. Any help or comments would
be appreciated.

Denis




  #2   Report Post  
Leo Lichtman
 
Posts: n/a
Default

Dennis, you might consider doing the whole shirt in tung oil, and wearing it
as rain gear.


  #3   Report Post  
Giles
 
Posts: n/a
Default


"Leif Thorvaldson" wrote in message
...
Well, since I have been told that LDD use is only effective in anecdotal
situations, I have been so crushed that I didn't dare raise Denis' hopes.
Anecdotally speaking (ahem!), I can only advise that it does work for

taking
tung oil out of tuxedos ("smoking" en français); however, that was only

one
time and I have not turned formally since!*G*


You turn in a tuxedo? Blimey, I'm dead impressed!

I once turned in a chenille jumper. Then I found out just how tenaciously
wood shavings can cling to fabric!

Giles.


  #4   Report Post  
Leif Thorvaldson
 
Posts: n/a
Default


"Giles" wrote in message
...

"Leif Thorvaldson" wrote in message
...
Well, since I have been told that LDD use is only effective in anecdotal
situations, I have been so crushed that I didn't dare raise Denis' hopes.
Anecdotally speaking (ahem!), I can only advise that it does work for

taking
tung oil out of tuxedos ("smoking" en français); however, that was only

one
time and I have not turned formally since!*G*


You turn in a tuxedo? Blimey, I'm dead impressed!

I once turned in a chenille jumper. Then I found out just how tenaciously
wood shavings can cling to fabric!

Giles.


====Hmmmh? Giles are you referring to a sleeveless dress worn over a
blouse or sweater or a pullover sweater. As to the tuxedo, I was referring
to it anecdotally speaking, therefore, it may or may not be true since I
didn't do a scientific study of it.*G*

Leif


  #5   Report Post  
Denis Marier
 
Posts: n/a
Default

Now I have graduated for tung oil stains to Gorilla glue.
The old rag shirt I wore most of the time is immune against stains.
Every-time I wear a new shirt it becomes stained. So I concluded that to
avoid stains is to wear my old rag shirt. ;--)
BTW to remove dried tung oil from eyes' glasses or shield the best way is to
use alcohol swabs or simply rubbing alcohol known as Isopropyl because it
contains a very small quantity of oil.

"Leif Thorvaldson" wrote in message
...

"Giles" wrote in message
...

"Leif Thorvaldson" wrote in message
...
Well, since I have been told that LDD use is only effective in

anecdotal
situations, I have been so crushed that I didn't dare raise Denis'

hopes.
Anecdotally speaking (ahem!), I can only advise that it does work for

taking
tung oil out of tuxedos ("smoking" en français); however, that was only

one
time and I have not turned formally since!*G*


You turn in a tuxedo? Blimey, I'm dead impressed!

I once turned in a chenille jumper. Then I found out just how

tenaciously
wood shavings can cling to fabric!

Giles.


====Hmmmh? Giles are you referring to a sleeveless dress worn over a
blouse or sweater or a pullover sweater. As to the tuxedo, I was referring
to it anecdotally speaking, therefore, it may or may not be true since I
didn't do a scientific study of it.*G*

Leif






  #6   Report Post  
Arch
 
Posts: n/a
Default

For Leif and all true believers, Strummed to the tune of an old 1960's
protest song:
copyright and all rights reserved
***********************************************
"How many quarts of LDD must be used before the uncracked wood isn't
antidotal?
How many gallons of water must be boiled before all the cracked wood has
gone? How many fifths of alcohol must be poured before all the wood is
dry? How many microwaves must be scorched before the wood is done? How
many blanks must be lost before we understand? .......The answer, my
friend, is not blowing on the wind but on our blown up bowls."

(Someone, somehow will disagree and that's no antidote)


Turn to Safety, Arch
Fortiter



http://community.webtv.net/almcc/MacsMusings

  #7   Report Post  
Leif Thorvaldson
 
Posts: n/a
Default


"Arch" wrote in message
...
For Leif and all true believers, Strummed to the tune of an old 1960's
protest song:
copyright and all rights reserved
***********************************************
"How many quarts of LDD must be used before the uncracked wood isn't
antidotal?
How many gallons of water must be boiled before all the cracked wood has
gone? How many fifths of alcohol must be poured before all the wood is
dry? How many microwaves must be scorched before the wood is done? How
many blanks must be lost before we understand? .......The answer, my
friend, is not blowing on the wind but on our blown up bowls."

(Someone, somehow will disagree and that's no antidote)


Turn to Safety, Arch
Fortiter



http://community.webtv.net/almcc/MacsMusings



===You could at least send us all a sound file with you singing and
accompanying yourself!*G*

Leif


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fiberglass Door Stain Billy Home Ownership 4 July 31st 06 03:22 PM
Will solid stain cover old stain on a deck? Mike in DE. Home Repair 1 September 7th 04 08:17 PM
Problem w/ uneven stain davidmc Woodworking 1 August 6th 04 04:35 PM
Deck stain. Recommendation? kristen Home Ownership 5 April 14th 04 05:17 PM
Removing wood stain ? Tenex UK diy 4 September 16th 03 11:56 AM


All times are GMT +1. The time now is 01:31 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"