Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
I actually had a small toy sears lathe in the '80's, but I gave it away
because it wasn't very good and I wasn't really interested in turning. I have a modest amount of woodworking experience, but not with a lathe. I am about as green as you can get, a total newbie. I went to this guy's shop to look at something else and saw this PM 90 3ph and he sold it to me for $350. It had been one of those in a school auction that he just wanted to get rid of, since he had closed his shop. The base cabinet needs to be redone (sandblasted and painted) but it is not too rusty. The lathe has little rust and looks pretty clean, though I will surely paint it the original "pea green" and polish it up. So I am not going to turn many pens with it, but it will make some spindles and be a good toy. I don't know whether I can find a duplicator for it, but that would be nice later. I don't have any tools and only one tool rest, but I am sure that they will come in time. Right now it is sitting on the floor inside my shop door disassembled and sometimes I hear a small voice comming from that direction saying "fix me!".... I plan to buy a book on turning and learn to do some basic stuff at first. It may take a while but I hope to "get there" in time. I may never be as good as those of you who have a great passion to work your lathes daily and I honestly don't aspire to do alot of what I have seen posted. To me it is a tool to help me with cabinet work and maybe to help me relieve some stress. But I am looking forward to reading posts here and maybe someday contributing. Enough musing for now. Hope you all have a great Christmas!!!!!! woodstuff |
#2
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
Woodstuff
Welcome to the addiction. This is a great group and feel free to come here for advice. Remember, there are at least three ways to turn everything and the only correct ones are those that work. The others are just for learning. This hobby/craft/art is a hoot. Blowing my own horn, there is some good starting stuff over at my web site. There is nothing to buy there but some fun things to read and see. Do yourself a favor and build my sharpening jig. Merry Christmas and a Happy Turning New Year -- God bless and safe turning Darrell Feltmate Truro, NS Canada http://aroundthewoods.com http://roundopinions.blogspot.com "woodstuff" wrote in message ... I actually had a small toy sears lathe in the '80's, but I gave it away because it wasn't very good and I wasn't really interested in turning. I have a modest amount of woodworking experience, but not with a lathe. I am about as green as you can get, a total newbie. I went to this guy's shop to look at something else and saw this PM 90 3ph and he sold it to me for $350. It had been one of those in a school auction that he just wanted to get rid of, since he had closed his shop. The base cabinet needs to be redone (sandblasted and painted) but it is not too rusty. The lathe has little rust and looks pretty clean, though I will surely paint it the original "pea green" and polish it up. So I am not going to turn many pens with it, but it will make some spindles and be a good toy. I don't know whether I can find a duplicator for it, but that would be nice later. I don't have any tools and only one tool rest, but I am sure that they will come in time. Right now it is sitting on the floor inside my shop door disassembled and sometimes I hear a small voice comming from that direction saying "fix me!".... I plan to buy a book on turning and learn to do some basic stuff at first. It may take a while but I hope to "get there" in time. I may never be as good as those of you who have a great passion to work your lathes daily and I honestly don't aspire to do alot of what I have seen posted. To me it is a tool to help me with cabinet work and maybe to help me relieve some stress. But I am looking forward to reading posts here and maybe someday contributing. Enough musing for now. Hope you all have a great Christmas!!!!!! woodstuff |
#3
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
Thanks!
|
#4
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
On Dec 23, 1:09*pm, "woodstuff" wrote:
I actually had a small toy sears lathe in the '80's, but I gave it away because it wasn't very good and I wasn't really interested in turning. *I have a modest amount of woodworking experience, but not with a lathe. *I am about as green as you can get, a total newbie. I went to this guy's shop to look at something else and saw this PM 90 3ph and he sold it to me for $350. It had been one of those in a school auction that he just wanted to get rid of, since he had closed his shop. *The base cabinet needs to be redone (sandblasted and painted) but it is not too rusty. *The lathe has little rust and looks pretty clean, though I will surely paint it the original "pea green" and polish it up. So I am not going to turn many pens with it, but it will make some spindles and be a good toy. *I don't know whether I can find a duplicator for it, but that would be nice later. *I don't have any tools and only one tool rest, but I am sure that they will come in time. *Right now it is sitting on the floor inside my shop door disassembled and sometimes I hear a small voice comming from that direction saying "fix me!".... I plan to buy a book on turning and learn to do some basic stuff at first. It may take a while but I hope to "get there" in time. *I may never be as good as those of you who have a *great passion to work your lathes daily and I honestly don't aspire to do alot of what I have seen posted. *To me it is a tool to help me with cabinet work and maybe to help me relieve some stress. But I am looking forward to reading posts here and maybe someday contributing. Enough musing for now. Hope you all have a great Christmas!!!!!! woodstuff Hi woodstuff, Yes Darrell's site is a good place to start. In addition buy "Woodturning A Foundation course" by Keith Rowley or the lathe book by Ernie Conover. I prefer the latter but most would probably prefer Keith's book. By the time you finish reading one of them you will be itching to get started. Bob http://www.outofcontrol-woodturning.com |
#5
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
Another thing you could do is check with your local woodworker's
store. Many of them, like Woodcraft or Rockler, have demonstrations and classes. If you can catch a woodturning demo I'm sure it will set the "turning hook" and reel you in. smile |
#6
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
In article ,
"woodstuff" wrote: I actually had a small toy sears lathe in the '80's, but I gave it away because it wasn't very good and I wasn't really interested in turning. I have a modest amount of woodworking experience, but not with a lathe. I am about as green as you can get, a total newbie. I went to this guy's shop to look at something else and saw this PM 90 3ph and he sold it to me for $350. It had been one of those in a school auction that he just wanted to get rid of, since he had closed his shop. The base cabinet needs to be redone (sandblasted and painted) but it is not too rusty. The lathe has little rust and looks pretty clean, though I will surely paint it the original "pea green" and polish it up. So I am not going to turn many pens with it, but it will make some spindles and be a good toy. I don't know whether I can find a duplicator for it, but that would be nice later. I don't have any tools and only one tool rest, but I am sure that they will come in time. Right now it is sitting on the floor inside my shop door disassembled and sometimes I hear a small voice comming from that direction saying "fix me!".... I plan to buy a book on turning and learn to do some basic stuff at first. It may take a while but I hope to "get there" in time. I may never be as good as those of you who have a great passion to work your lathes daily and I honestly don't aspire to do alot of what I have seen posted. To me it is a tool to help me with cabinet work and maybe to help me relieve some stress. But I am looking forward to reading posts here and maybe someday contributing. Enough musing for now. Hope you all have a great Christmas!!!!!! woodstuff The best book is Keith Rowley's "Wood Turning a Foundation Course" -- -------------------------------------------------------- Personal e-mail is the n7bsn but at amsat.org This posting address is a spam-trap and seldom read RV and Camping FAQ can be found at http://www.ralphandellen.us/rv |
#7
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
I saved the web sites in my favorites and will study them after the Holidays. |
#8
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
Hi woodstuff, Yes Darrell's site is a good place to start. In
addition buy "Woodturning A Foundation course" by Keith Rowley or the lathe book by Ernie Conover. I prefer the latter but most would probably prefer Keith's book. By the time you finish reading one of them you will be itching to get started. Bob http://www.outofcontrol-woodturning.com Web site saved and I will look at the book for sure! Thanks woodstuff |
#9
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
wrote in message:
| Another thing you could do is check with your local woodworker's | store. Many of them, like Woodcraft or Rockler, have demonstrations | and classes. If you can catch a woodturning demo I'm sure it will set | the "turning hook" and reel you in. smile I will try to go to a demo or class, but I can probably get most of it from a book(s) and learn alot by just playing with it. I don't have much free time to go to classes, but rather have to steal time occasionally. I never went to school to learn my trade, but gleaned some from others over the years and learned by doing. I have a small cabinet shop and the lathe will be right there if I want to go on a "rabbit trail". It is always a boom or bust thing for me and right now business is good. I will somehow find some time. Turning will be a perfect hobby for me. Thanks for the suggestion! woodstuff |
#10
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
| The best book is Keith Rowley's "Wood Turning a Foundation Course"
I will definitely look for this book! Thanks! |
#11
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
One other route is when you're at the woodworking store look to see if
they know of any local woodworking or turning clubs in your area. You might be able to get one of the members to come by and give you a few pointers. On Mon, 24 Dec 2007 12:04:44 -0600, "woodstuff" wrote: I will try to go to a demo or class, but I can probably get most of it from a book(s) and learn alot by just playing with it. I don't have much free time to go to classes, but rather have to steal time occasionally. I never went to school to learn my trade, but gleaned some from others over the years and learned by doing. I have a small cabinet shop and the lathe will be right there if I want to go on a "rabbit trail". It is always a boom or bust thing for me and right now business is good. I will somehow find some time. Turning will be a perfect hobby for me. Thanks for the suggestion! woodstuff |
#12
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
Hi Woodstuuf,
The turning books by Ernie Conover are real nice. I did take his bowl turning class and learned a great deal. There are a great number of books out there, check the book store shelves and find the ones that interst you and start there. Good luck and keep it fun! Dan "turnerbob" wrote in message ... On Dec 23, 1:09 pm, "woodstuff" wrote: I actually had a small toy sears lathe in the '80's, but I gave it away because it wasn't very good and I wasn't really interested in turning. I have a modest amount of woodworking experience, but not with a lathe. I am about as green as you can get, a total newbie. I went to this guy's shop to look at something else and saw this PM 90 3ph and he sold it to me for $350. It had been one of those in a school auction that he just wanted to get rid of, since he had closed his shop. The base cabinet needs to be redone (sandblasted and painted) but it is not too rusty. The lathe has little rust and looks pretty clean, though I will surely paint it the original "pea green" and polish it up. So I am not going to turn many pens with it, but it will make some spindles and be a good toy. I don't know whether I can find a duplicator for it, but that would be nice later. I don't have any tools and only one tool rest, but I am sure that they will come in time. Right now it is sitting on the floor inside my shop door disassembled and sometimes I hear a small voice comming from that direction saying "fix me!".... I plan to buy a book on turning and learn to do some basic stuff at first. It may take a while but I hope to "get there" in time. I may never be as good as those of you who have a great passion to work your lathes daily and I honestly don't aspire to do alot of what I have seen posted. To me it is a tool to help me with cabinet work and maybe to help me relieve some stress. But I am looking forward to reading posts here and maybe someday contributing. Enough musing for now. Hope you all have a great Christmas!!!!!! woodstuff Hi woodstuff, Yes Darrell's site is a good place to start. In addition buy "Woodturning A Foundation course" by Keith Rowley or the lathe book by Ernie Conover. I prefer the latter but most would probably prefer Keith's book. By the time you finish reading one of them you will be itching to get started. Bob http://www.outofcontrol-woodturning.com |
#13
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
one more recommendation:
if the class is not practical, get a DVD. Might even help more than the book. I like the one by Jimmy Clewes. He has 4 but the first is called Turnaround. You see basic work, stances, sharpening and tips. Seeing is believing. Enjoy, Max |
#14
Posted to rec.crafts.woodturning
|
|||
|
|||
My first lathe, my first post here
if no one else has mentioned it, vist www.woodturner.org, the aaw site, look
around and see if there is a local chapter I am webmaster for a local chapter (www.woodturners.org) with a similar url so you can look there and see what these chapters are like - but they are all different - if there is one near you, it will almost for sure be something you want to connect with. -- Posted via a free Usenet account from http://www.teranews.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Which quick change tool post set for this lathe? | Metalworking | |||
Quick Change Tool Post, for Mini Lathe? | Metalworking | |||
Lathe tool post question | Metalworking | |||
Jet Mini Lathe Tool Rest Post Diameter? | Woodturning | |||
Wood Question: Which is stronger, a round post or square post? | Woodworking |